Motorola DTR700 Manual de consulta rápida - Página 2

Navegue en línea o descargue pdf Manual de consulta rápida para Radio bidireccional Motorola DTR700. Motorola DTR700 8 páginas.
También para Motorola DTR700: Actualización del firmware (13 páginas)

Imprimir página

English

Charging with a Drop-In Tray SUC

The radio comes with a standard power supply and a Single Unit

Charger.

Notice: Turn off the radio before charging and fully charge the

battery before first use. It is best to charge at room temperature.

1 Place the SUC on a flat surface.

2 Insert the connector of the power supply into the port on the side of

the SUC.

3 Plug the AC adapter into a power outlet.

4 Insert the radio into the SUC with the front of the radio facing the LED

of the SUC. Ensure the radio is securely inserted all the way into the

charger.

The charger LED flashes a few times to indicate the current battery

charge when the radio is inserted in the tray rails. The light on the

charger is red to indicate that the battery is charging and turns green

indicates that the battery is fully charged.

Charging a Radio and Battery using a MUC

The Multi-Unit Charger (MUC) is an optional accessory and it has six

charging pockets, which allows charging up to six radios or batteries.

The batteries can be charged together with or without the radios or

placed in the MUC separately.

Notice: Turn off the radios before charging and it is best to

charge at room temperature.

1 Place the MUC on a flat surface.

2 Insert the power cord plug into the dual pin connector at the bottom of

the MUC.

3 Connect the power cord into an AC outlet.

4 Insert the radio or battery into the charging pocket with the front of the

radio or battery facing the LED of the MUC.

The charger LED flashes a few times to indicate the current battery

charge when the radio is inserted in the tray rails. The light on the

charger is red to indicate that the battery is charging and turns green

indicates that the battery is fully charged.