diLUSSO CC604MBT Manual de instalación y funcionamiento - Página 14
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Placa diLUSSO CC604MBT. diLUSSO CC604MBT 16 páginas.
Installing the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Ensure the control knobs line
up over the edge of the table to prevent damaging it . Place the screw into the bracket and screw in only
partially into the screw holes on the hob base. Tighten fully once after the hob has been placed and
aligned on the worktop properly.
Adjust the bracket orientation to cater for different worktop thickness.
Ensure the brackets do not touch or come to rest on the cutout face of the worktop after
installation.
Electrical Connection
The manufacture shall not liable for any direct or indirect damage caused by faulty installation. The
installer must ensure that the product installation and connection complies with the local and general
regulation in force.
IMPORTANT! THE APPLIANCE MUST BE CONNECTED IN ACCORDANCE WITH CURRENT ELECTRICAL RULES
AND REGULATIONS. INSTALLATION IS TO BE DONE ONLY BY AN AUTHORISED ELECTRICIAN.
WARNING! THIS APPLIANCE MUST BE EARTHED.
IMPORTANT! AN ISOLATION CUIRCIUT BREAKER SWITCH WITH SUITABLE AMPERAGE MUST BE
INCORPORATED IN THE FIXED WIRING.
Version 01
14
A
Screw
B
Fixing Bracket
C
Screw Hole
D
Hob Base