Motorola GP280 Manual del usuario - Página 43
Navegue en línea o descargue pdf Manual del usuario para Radio bidireccional Motorola GP280. Motorola GP280 46 páginas. Professional radio, power distribution and controller
También para Motorola GP280: Información de servicio (32 páginas), Información de servicio (30 páginas), Manual del usuario (46 páginas), Información de servicio (30 páginas)
Imprimir página
SCAN
This section outlines the scan functions of your radio.
All references to what is shown on the display is only
valid forGP280 radios. Throughout this section, the
display below
PLANT POLICE
is used to indicate the radio's home display.
SCAN OPERATION
The scan feature allows you to monitor activity on
different conventional or trunked modes by scanning a
scan list of modes. This list can be programmed with
the Customer Programming Software (CPS) or user
programmable.
The table below lists the types of scan operations
available depending on radio model.
Conventional
Comprises conventional-only modes.
Comprises conventional modes and
Talkgroup
trunked modes from more than one
Scan
trunking system.
Automatic scanning (autoscan) can be programmed
through the CPS. If autoscan is enabled for a mode,
your radio begins scanning, using the mode's scan list,
whenever you select that mode.
The radio will continue autoscanning until you select a
mode that does not have autoscan enabled.
Turning Scan On or OFF with the Keypad
(GP280 radios only)
Press / until
1.
SCAN is displayed.
Press ; (the soft-
2.
key below SCAN).
3.
Press the softkey
below the desired
scan state (on or off).
The radio returns to
the home display.
Note: The scan status annunciator, G, is
displayed when the scan operation is active. It
will be removed from the display when the scan
operation is terminated.
PHON SCAN CALL
You will see the
current scan state
momentarily.
SCAN ON
or
SCAN OFF
Then
OFF
ON
PLANT POLICE
English
39