Motorola MJ270AR Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Radio bidireccional Motorola MJ270AR. Motorola MJ270AR 4 páginas.

Imprimir página

djust the volume appropriately by rotating

Talking and Listening

volume before placing the accessory on your head or in your ear.

To communicate, all radios in your group must be set to the same

4. To turn off, simply remove accessory.

channel and Interference Eliminator Code.

Note: There is a short delay between the time you start talking and

1. To talk, press and hold

when the radio transmits. There is a short delay before the

2. When you are finished talking, release

transmission is completed.

For maximum clarity, hold the radio two to three inches away from

Setting the Sensitivity Level When in

your mouth and speak directly into the microphone. Do not cover

djusting the radio's sensitivity level helps minimize the possibility

the microphone while talking.

of unintended noises triggering a transmission and helps the radio

Talk Range

pick up soft voices.

Your radio is designed to maximize performance and improve

1. Press

transmission range. Do not use the radios closer than five feet apart.

the display.

Monitor Button

2. Press

Pressing and holding

for three seconds allows you to listen to the

3. Press

volume level of the radio when you are not receiving. This allows you

to adjust the volume, if necessary. You can also press

to check

3 = High Sensitivity for quiet environments

for activity on the current channel before you talk.

2 = Medium Sensitivity for most environments

Push-to-Talk

Timeout Timer

1 = Low Sensitivity for noisy environments

To prevent accidental transmissions and save battery life, the radio

emits a continuous warning tone and stops transmitting if you

Note: When you connect a headset, the radio is automatically set to

press

for 60 continuous seconds.

the last chosen sensitivity level.

Noise Filtering

Menu Options

The Q

noise-filtering feature helps to ensure uninterrupted

communication with other Motorola radios that have this feature.

Selecting the Channel

This feature also filters out unwanted transmissions from other

The channel is the frequency your radio uses to transmit. See the

radios. This is useful in places where there is heavy radio traffic,

"Channels and Frequencies" table under Licensing Information for

such as amusement parks or ski resorts.

details.

Note: Q

noise filtering is not available when the radio is scanning.

1. With the radio on, press

. When the radio is on a 0.5

To turn Q

watt channel,

displays. When the radio is on a 1.5 watts

1. Press

channel,

displays. The current channel flashes.

2. Press

and select an unused or quiet channel.

3. Press

to save the channel setting or

to continue set up.

To transmit to a radio that has Q

Selecting the Interference Eliminator Code

1. Select the same channel and Interference Eliminator Code as

Interference Eliminator Codes help minimize interference by

the other radio.

blocking transmissions from unknown sources. Your radio has 121

2. Press

Interference Eliminator Codes. Codes 1 – 38 are the standard analog

through the Q

codes that appear on other radios. Codes 39 – 121 are additional

3. Press

digital codes added for superior interference protection. 0 is the off

position, no analog or digital codes are enabled.

Note: If you skip step 2, the beginning of your message may not be

heard on the receiving radio. For a 30-second period, starting after

To set the code for a channel:

the last transmission, all transmissions received on the selected

1. Press

until the code starts to flash.

channel and code will pass through the Q

2. Press

to select the code.

Keypad Tones

3. Press

to save the code setting or

to continue set up.

You may enable or disable the speaker key tones. You will hear the

You can set a different code for each channel using this procedure. n

key tone each time a button is pushed.

extended press of

allows you to scroll through the

1. Press

Interference Code rapidly so you can quickly reach the code you want.

2. Press either

Note: You must set the Interference Eliminator Code to 0 on a radio

3. Press

that uses Interference Eliminator Codes to communicate with radios

that do not have Interference Eliminator Codes. Select 0 for "no

Note: When the key tone feature is off, the following are not disabled:

tone, no code" and OFF will flash on your radio's display.

•

Transmit timeout alert tone

Setting and Transmitting Call Tones

•

Call tone

•

Low battery alert tone or

Your radio can transmit different call tones to other radios in your

group so you can alert them that you want to talk. You have 10 call

•

The transmitted talk confirmation tone

tones from which to choose.

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish

To set a call tone:

transmitting. It is like saying "Roger" or "Over" to let others know

1. With the radio on, press

three times until the current

you are finished talking.

call tone setting (0 - 10) flashes and

appears.

1. With the radio on, press

2. Press

to change and hear the call tone.

setting On/Off flashes.

3. Press

to set the new call tone or

to continue set up.

2. Press

To transmit your call tone to other radios set to the same channel

3. Press

and Interference Eliminator Code as your radio, press

Note: Setting the call to 0 disables the call tone feature.

Hands-Free Use Without ccessories (

)

Emergency lert Mode

You can use the iVOX feature to transmit hands-free without the need

The Emergency lert feature can be used to signal members in your

for any headset accessories. Once iVOX is turned on, the radio detects

group of your need for urgent help. MJ series radios will operate in

your voice and transmits when you speak into the internal microphone.

an automatic "hands-free" emergency control mode for a total of 30

seconds after activating the Emergency lert. MJ series radios in

1. Press

until

appears on the display. The current

your group will automatically advance the speaker volume to the

setting On/Off will flash.

maximum setting and sound a warbling alert tone for 8 seconds. The

2. Press

to select On or Off.

alert tone is emitted from your own radio speaker and the receiving

radios in your group. fter the 8 second alert, any spoken words or

3. Press

to set or

to continue set up.

incidental sounds at your end will be transmitted to the group for 22

seconds. For the 30 second duration of Emergency lert mode, MJ

Hands-Free Use With ccessories (

)

series radio controls and buttons will be locked to maximize

You can transmit hands-free more reliably with the use of optional

reception of the emergency message.

headset accessories. Once VOX is turned on, the radio detects your

1. Press and hold the Emergency lert button for 3 seconds.

voice and transmits when you speak.

2. Release the button after the LED Indicator glows red and the alert

Many accessories (sold separately) are available for your radio. For more

tone begins to sound. There is no need to continue to hold the

information, visit our Web site at www.motorolasolutions.com/talkabout.

Emergency lert button or use PTT for your message to be

transmitted.

1. Turn the radio off and plug the VOX accessory into the

accessory port.

2. Turn the radio on. VOX shows on the display.

fter the alert tone ends you may speak into the microphone.

. Lower the

Your voice or incidental sounds will be transmitted. The LED

indicator will continue to glow for the duration of the 22 second

period.

fter 30 seconds your radio speaker will emit a Talk Confimation

Tone and the LED Indicator will extinguish. Operation then

returns to normal two-way mode.

Note: ll Motorola Talkabout EM, MJ, and MR series radios are fully

Mode

compatible with the Emergency lert feature. Radios other than EM,

MJ, MR series can receive the emergency alert signal, but will not

respond with adjusted volume settings, locked controls, or a warbling

alert tone. Users of other radio models set to the same channel and

Interference Eliminator Code will hear a steady tone for 8 seconds

until VOX/iVOX and the level setting (1-3) appear on

followed by the voice transmission for 22 seconds.

Warning: The Emergency lert feature should only be used in the

to select the sensitivity level.

event of an actual emergency. Motorola is not responsible if there

to set or

to continue set up.

is no response to the emergency alert from the receiving group.

Built-in Flashlight

Press and hold the flashlight button to turn and keep the light on.

The switch functions as a momentary control for the light.

Note: Turn off the flashlight when not in use to conserve battery power.

Keypad Lock

To avoid accidentally changing your radio settings:

1. Press

and hold until

2. When in lock mode, you can turn the radio on and off, adjust the

volume, receive, transmit, send a call tone, and monitor

channels. ll other functions are locked.

To unlock the radio, press and hold

Scanning Channels

Use scan to search the channels for transmissions from unknown

noise filtering on or off:

parties, to find someone in your group who has accidentally

until

displays. The current setting On/Off will flash.

changed channels, or to quickly find unused channels for your

to turn noise filtering On or Off.

own use.

There is a priority feature and 2 modes of scanning ( basic and

to confirm your selection or

to continue set up.

advanced ) to make your search more effective. The basic scan

noise filtering turned on:

mode uses the channel and code combinations for each of the

channels as you have set them (or with the default code value of 1).

The " dvanced Scan" mode will scan all channels for any and all

to send a call tone. This allows your voice to pass

codes, detect any code in use, and use that code value temporarily

noise filter on the receiving radio.

for that channel.

and speak normally.

Priority is given to the "home channel," that is, the channel (and

Interference Eliminator Code) your radio is set to when you start the

scan. This means the initial channel (and code setting) is scanned

more often than the other channels, and your radio will respond

noise filter.

quickly to any activity occurring on the home channel as a priority.

To start Basic Scanning:

1. Briefly press the

display, and the radio will begin to scroll through the channel

and code combinations.

until

appears. The current setting On/Off will flash.

2. When the radio detects channel activity matching the channel

to turn On or Off.

and code combination, it stops scrolling and you can hear the

to confirm or

to continue set up.

transmission.

3. To respond and talk to the person transmitting, press

five seconds after the end of the transmission.

4. The radio will resume scrolling through the channels five

seconds after the end of any received activity.

5. To stop scanning, briefly press the

To start dvanced Scanning:

1. Set the Interference Eliminator Code to "zero" or OFF.

2. Briefly press the

display, and the radio will begin to scroll through the channels.

until the

appears. The current

No Interference Eliminator Codes will filter what is heard.

3. When the radio detects channel activity with NY code (or NO

to turn On or Off.

code), it stops scrolling and you can hear the transmission. ny

Interference Eliminator Code that may be in use by that party

to set or

to quit menu mode.

will be detected and displayed.

4. To respond and talk to the person transmitting, press

Special Features

five seconds of the end of the transmission. The radio will

transmit using the newly detected Interference Eliminator Code.

5. The radio will resume scrolling through the channels five

seconds after the end of any received activity.

6. To stop scanning, briefly press the

Scanning Notes:

1. If you press

while the radio is scrolling through inactive

channels, the transmission will be on the "home channel".

Scanning will resume five seconds after the end of your

transmission. You may press the

time.

2. If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing

3. If the radio repeatedly stops on an undesired transmission, you

may temporarily remove that channel from the scan list by

pressing and holding

remove more than one channel in this way.

4. To restore the removed channel(s) to the scan list, turn the radio

off and then back on, or exit and re-enter the scanning mode by

pressing

5. You cannot remove the home channel from the scan list.

6. In dvanced Scan, the detected code will only be used for one

transmission. You must note the code, exit scan, and set that

detected code on that channel to permanently use the detected

code.

displays.

until

is no longer displayed.

key. The scan

will appear in the

within

key.

key. The scan

will appear in the

within

key.

key to stop scanning at any

for three seconds. You may

Warranty

Normal Wear and Tear. Periodic maintenance, repair and

Consumer Two-Way Radio Products and ccessories purchased in

replacement of parts due to normal wear and tear are excluded

rgentina, Chile, Colombia and Peru.

from coverage.

What Does this Warranty Cover?

Batteries. Only batteries whose fully charged capacity falls below

Subject to the exclusions contained to the right, Giant International

80% of their rated capacity and batteries that leak are covered by

Ltd. warrants the Motorola branded consumer two-way radios that

this limited warranty.

operate via Family Radio Service or General Mobile Radio Service

buse & Misuse. Defects or damage that result from: (a) improper

that it manufactures ("Products"), the Motorola branded or certified

operation, storage, misuse or abuse, accident or neglect, such as

accessories sold for use with these Products that it manufactures

(" ccessories") to be free from defects in materials and

physical damage (cracks, scratches, etc.) to the surface of the

product resulting from misuse; (b) contact with liquid, water, rain,

workmanship under normal consumer usage for the period(s)

outlined below. This limited warranty is a consumer's exclusive

extreme humidity or heavy perspiration, sand, dirt or the like, extreme

heat, or food; (c) use of the Products or ccessories for commercial

remedy, and applies as follows to new Motorola branded Products

purposes or subjecting the Product or ccessory to abnormal usage

and ccessories manufactured by Giant International Ltd., and

or conditions; or (d) other acts which are not the fault of Motorola or

purchased by consumers in the countries listed above, which are

Giant International Ltd., are excluded from coverage.

accompanied by this written warranty:

Use of Non-Motorola branded Products and ccessories. Defects

or damage that result from the use of Non-Motorola branded or

certified Products, ccessories, or other peripheral equipment are

Products Covered

Length of Coverage

excluded from coverage.

Products and ccessories as

One (1) year from the date of

Unauthorized Service or Modification. Defects or damages

defined above, unless otherwise

purchase by the first consumer

resulting from service, testing, adjustment, installation,

provided for below.

purchaser of the product unless

maintenance, alteration, or modification in any way by someone

otherwise provided for below.

other than Motorola, Giant International Ltd. or its authorized

service centers, are excluded from coverage.

1. Consumer Two-Way Radio

1. Ninety (90) days from the

ccessories.

date of purchase by the first

ltered Products. Products or ccessories with (a) serial numbers

consumer purchaser of the

or date tags that have been removed, altered or obliterated; (b)

product.

broken seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

2. Products and ccessories

2. The balance of the original

branded housings, or parts, are excluded from coverage.

that are Repaired or

warranty or for ninety (90)

Replaced.

days from the date returned

Communication Services. Defects, damages, or the failure of

to the consumer, whichever

Products or ccessories due to any communication service or

is longer.

signal you may subscribe to or use with the Products or

ccessories is excluded from coverage.

Who is covered?

What Other Limitations re There?

This warranty extends only to the first consumer purchaser, and is

NY IMPLIED W RR NTIES, INCLUDING WITHOUT LIMIT TION

not transferable.

THE IMPLIED W RR NTIES OF MERCH NT BILITY ND FITNESS

FOR

P RTICUL R PURPOSE, SH LL BE LIMITED TO THE

What will GI NT INTERN TION L LTD. do?

DUR TION OF THIS LIMITED W RR NTY, OTHERWISE THE REP IR,

GI NT INTERN TION L LTD., at its option, will at no charge repair,

REPL CEMENT, OR REFUND S PROVIDED UNDER THIS EXPRESS

replace or refund the purchase price of any Products or

LIMITED W RR NTY IS THE EXCLUSIVE REMEDY OF THE

ccessories that does not conform to this warranty. We may use

CONSUMER, ND IS PROVIDED IN LIEU OF LL OTHER

functionally equivalent reconditioned/ refurbished/ pre-owned or

W RR NTIES, EXPRESS OR IMPLIED. IN NO EVENT SH LL

new Products, ccessories or parts.

MOTOROL OR GI NT INTERN TION L LTD. BE LI BLE, WHETHER

How to Obtain Warranty Service or Information?

IN CONTR CT OR TORT (INCLUDING NEGLIGENCE) FOR D M GES

Please return product to the retailer, otherwise to obtain service or

IN EXCESS OF THE PURCH SE PRICE OF THE PRODUCT OR

information, please call:

CCESSORY, OR FOR NY INDIRECT, INCIDENT L, SPECI L OR

CONSEQUENTI L D M GES OF NY KIND, OR LOSS OF REVENUE

Argentina

Chile

OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORM TION OR

OTHER FIN NCI L LOSS RISING OUT OF OR IN CONNECTION

0-800-666-86-76

0-800-201-442

WITH THE BILITY OR IN BILITY TO USE THE PRODUCTS OR

CCESSORIES TO THE FULL EXTENT THESE D M GES M Y BE

Colombia

Peru

DISCL IMED BY L W.

1-800-700-15-04

0-800-52-470

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation on

For ccessories, please call the telephone number designated

the length of an implied warranty, so the above limitations or

above for the product with which they are used.

exclusions may not apply to you. This warranty gives you specific

You will receive instructions on how to ship the Products or

legal rights, and you may also have other rights that vary from state

ccessories at your expense, to a GI NT INTERN TION L LTD.

to state or from one jurisdiction to another.

uthorized Repair Center. To obtain service, you must include: (a) a

copy of your receipt, bill of sale or other comparable proof of

purchase; (b) a written description of the problem; (c) the name of

your service provider, if applicable; (d) the name and location of the

installation facility (if applicable) and, most importantly; (e) your

address and telephone number.

Patent and Copyright Information

Manufactured, distributed or sold by Giant International Ltd., official

licensee for this product. MOTOROL , MOTOROL SOLUTIONS and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC and are used under license. ll

other trademarks are the property of their respective owners.

Exclusions

Models MJ270 R, MJ270CLR, MJ270CMR, MJ270PR