Epson EQUITY II+ Boletín de asistencia sobre productos - Página 8

Navegue en línea o descargue pdf Boletín de asistencia sobre productos para Escritorio Epson EQUITY II+. Epson EQUITY II+ 21 páginas. 12 mhz
También para Epson EQUITY II+: Boletín de asistencia sobre productos (19 páginas), Boletín de asistencia sobre productos (45 páginas), Manual del producto (12 páginas)

Subject: Tape Backup System Test Results

Date: 6/13/89

Page: 1 of 2

The Epson America Product Support Center has recently tested four tape

backup systems:

Archive VP - 150i

Mountain Series 4000 FileSafe

Tallgrass TG - 4060 +

Tecmar QT - 60e

The tape drives were tested on a variety of systems (please see the notes

below). In all cases, the drive manufacturer's documentation was used as a

guide to installation and operation. Note that for 8086/88 computers, the

XT- type settings were used. For the 80286/386 computers, the AT- type

settings were used. This is important for correctly configuring the host

adapters or controller cards for IRQ, DMA and I/O port address.

Archive VP - 150i

The VP - 150i was tested on the Equity II +, Ill + and 386/20. Due

to the capacity and nature of the drive, it is not particularly suited

for use in any of the 8086/88 computers. This was the only drive

supplied with Unix/Xenix device drivers. It was tested under MS -

DOS 3.3 and SC0 Xenix 286 System V version 2.2.1 with no

problems encountered. The VP - 150i is also Novell tested and

certified under the NetWare operating system.

Mountain Series 4000 FileSafe

The Series 4000 FileSafe was tested on the Equity II+, III + and

386/20. Due to the use of a 16 - bit controller, it was not tested

in any of the 8086/88 computers. It was tested under MS - DOS

3.3 with no problems encountered. A chapter is included in the

tape software documentation on backup and restore operations on

a local area network, including Novell.

Product Support Bulletin

PSB No: S-0087

Originator: MWT w

Internal, 150MB

External, 40MB

External, 60MB