Motorola MBP432 Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Vigilabebés Motorola MBP432. Motorola MBP432 29 páginas. Digital video baby monitor
También para Motorola MBP432: Manual del usuario (27 páginas), Manual de inicio rápido (2 páginas), Manual del usuario (27 páginas)
Imprimir página
4.6.3
Delete a camera
M
1. Press the
Menu button and the menu bar will pop up.
<
2. Press the
LEFT button or
+
the
/
/
+
3. Press the
UP button or
button to confirm.
C
C
C
4.
1 /
2 /
to select the desired CAM, and press the OK button to select.
+
5. Press the
UP or
to delete that registration.
4.6.4
Scan the cameras
M
1. Press the
Menu button and the menu bar will pop up.
<
2. Press the
LEFT button or
+
the
/
/
+
3. Press the
UP button or
button to confirm.
4. The screen will then display images from each registered camera in a loop,
changing about every 12 seconds.
TIP
Press OK repeatedly for a quick way to go to
NOTE
If the parent unit is in scan mode and one of the registered cameras is turned off
or out of range, the scan will stop at the missing camera, display "no signal -
check or del cam 1" (if camera 1 is missing), and emit a warning beep every 5
seconds.
WARNING
Check the camera and correct the fault immediately if you are using that
camera to monitor your baby.
If you want to continue in camera scan mode without that camera, delete the
camera (see 4.6.3 Delete a camera) and start the scan again.
4.7
Temperature
M
1. Press the
Menu button and the menu bar will pop up.
<
2. Press the
LEFT button or
+
3. Press the
UP button or
16
>
RIGHT button until
/
menu will pop up.
-
DOWN button to select
C
3 /
4 will pop up, press the
-
DOWN button to select X, and press the OK button
>
RIGHT button until
/
menu will pop up.
-
DOWN button to select
>
RIGHT button until
-
DOWN button to select °C or °F.
C
is highlighted, and
, and press the OK
+
-
UP button or
C
is highlighted, and
, and press the OK
mode without using the menu.
t
is highlighted.
Parent Unit Menu Options
DOWN button