Epson Equity LT Boletín de asistencia sobre productos - Página 7
Navegue en línea o descargue pdf Boletín de asistencia sobre productos para Escritorio Epson Equity LT. Epson Equity LT 24 páginas. Product support bulletin(s)
También para Epson Equity LT: Manual del producto (5 páginas)
NUMBER:
S-0055
How to get the most out of the Equity LT
It is possible
the Equity LT by following a few simple guidelines:
1) Turn the hard disk drive power OFF. For most applications,
constant
access
Once the
application
drive
access
off.
When
power switch back on, wait for the HDD to spin up and then
save.
Another
with the HDD power off.
longer, and a "1701-C"
this
situation
your application from the FDD.
2) Set
the
backlight
accomplished from the SETUP program. If you pause to think
about what you're doing, the backlight will turn off after
30 seconds.
580mA.
Also,
low
as
is
brightness and full brightness can be as much as 445mA.
3)
Run
at
4.77
between 4.77 MHz and 10 MHz is 70-80mA.
4)
Completely
the battery drain all the way down.
LED
starts
and
then leave the LT powered up.
supplied
by
level and the system will power down.
(12 hour) recharge.
effect.
to extend the working
to
the
hard
is
LED to go out and turn the
you're
ready
to save
alternative
The
error
and
should be
period
This drops
power
set the brightness and contrast controls as
comfortable.
MHz.
The
difference
discharge
the
flashing,
save your work in progress
the
battery
This will help to minimize the memory
battery charge time of
disk
drive
loaded into RAM,
your work,
is
to
boot
the
self-test
power-on
will
display.
ignored.
to
0.5
minutes.
consumption
The
difference
in power
battery.
From time to time, let
When
Eventually,
will
drop
below
Then give it a full
3 of 4
PAGE:
is
not
required.
wait
for
the
HDD power switch
turn the HDD
LT
from
floppy
will
take
This is normal
Then you can
This
by
as
much
between
1/2
consumption
the
LOW
BATTERY
(if any)
the power
the
threshold
is
as