Motorola C1001LA Manual del usuario - Página 31
Navegue en línea o descargue pdf Manual del usuario para Teléfono inalámbrico Motorola C1001LA. Motorola C1001LA 42 páginas.
Imprimir página
9.7
Registering an additional handset
NOTE
Handset batteries must be fully charged before you start to register. Hold your handset
close to the base during the registration process. Handsets that were supplied with your
C1LA base are already pre-registered.
On the base:
p
1. Press and hold
registration mode for 60 seconds.
m
On the handset:
1. Press
, scroll
d
2. Scroll
to
REGISTER
3. The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default =
0000) and press
is automatically assigned an available handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat the process again in case the
base registration period ran out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the registration will fail. You must
de-register another handset before you can register a new one.
9.8
De-register a handset
m
Use one handset to de-register another. You cannot de-register the handset that you are
using.
1. Press
, scroll
d
2. Scroll
to
UNREGISTER
3. Enter the 4 digit PIN code (default = 0000) and press
u
d
4. Scroll
or
to select the handset number that you want to de-register and press
You will hear a confirmation beep and the display will return to the previous menu.
9.9
Restore default settings
You can restore your C1LA to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Calls list. All handset
and base settings will also be reset.
Base settings
for 5 seconds until you hear a beep. The base will remain in
m
d
to
ADVANCED SET
m
and press
. You will hear a beep if the registration is successful. The handset
m
d
to
ADVANCED SET
and press
m
and press
.
.
m
and press
.
m
.
.
m
.
31