Motorola D514 Manual del usuario - Página 30

Navegue en línea o descargue pdf Manual del usuario para Teléfono inalámbrico Motorola D514. Motorola D514 46 páginas. Digital cordless telephone with digital answering machine

Imprimir página

1. Getting Started

On the handset:

1. Press

, scroll

REG BASE

2. Scroll

and press

3. Enter the base number (1 - 4).

The base numbers that are already in use flashes. The

SEARCHING...

display shows

4. When the handset finds the base signal, the display

SEARCHING...X

shows

, where

identification number.

5. The display will ask for the PIN to be entered. Enter the

4 digit PIN code (default = 0000) and press

You will hear a beep if the registration is successful.

The handset is automatically assigned an available

handset number. Use this number when making

internal calls.

NOTE

If registration is not successful the first time, please repeat

the process again in case the base registration period ran

out of time. If the base is not found after a few seconds, the

handset returns to standby. Try registering again.

If there are already 5 handsets registered to the base, the

registration will fail. You must de-register another handset

before you can register a new one.

and press

indicates the base

9.2

to your D5 base

IMPORTANT

DECT GAP Profile only guarantees that basic calling

functions will work correctly between different makes/types

of handset and base. There is a possibility that certain

devices such as Caller ID will not work correctly and TAM

setting may not be available.

On the base:

1. Press and hold the

hear two beeps. The base will remain in registration

mode for 90 seconds.

On the handset:

Follow the registration instructions given in your handset's

user guide.

9.3

Select a base

If your D5 handset is registered to more than one base (e.g.

one at work and one at home), you can select which base to

use.

Each handset can be registered with up to four bases.

1. Press

The display shows

button for 3 seconds until you

, scroll

and press

SELECT BASE

Using additional handsets