Motorola IT.5.2XI Manual - Página 37

Navegue en línea o descargue pdf Manual para Teléfono inalámbrico Motorola IT.5.2XI. Motorola IT.5.2XI 48 páginas.

Imprimir página
Motorola IT.5.2XI Manual
10. Using additional handsets
Up to 5 handsets can be registered to one base station. Additional handsets must
be registered to the base before you can use them.
•
The instructions described below apply specifically to the IT.5XI handset. If
you wish to register another manufacturer's handset, the instructions may
vary. In this case, please refer to the instruction manual of the
additional handset.
•
The System PIN is required to register or unregister handsets. The default PIN
is 0000.
10.1

Registering an additional handset

Note
Handset batteries must be fully charged before you start to register. Hold your
handset close to the base during the registration process. Handsets that were
supplied with your IT.5XI base are already preregistered.
On the base:
1.
Press and hold
registration mode for 90 seconds.
On the handset:
1.
Press Menu, scroll
Register Handset
2.
3. Bases are displayed. If necessary, scroll
register the IT.5XI handset to and press Select.
4. Enter the system PIN and press OK.
5. The display shows
6. When registration is successful the display shows
hear a confirmation beep.
Note
If registration is not successful the first time, please repeat the process again in
case the base registration period ran out of time. If the base is not found after a
few seconds, the handset returns to standby. Try registering again.
If there are already 4 handsets registered to the base, registration will fail. You
must de-register a handset before you can register a new one.
10.2

Register a different make of handset to your IT.5XI base

IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly
between different makes / types of handset and base. There is a possibility that
certain features such as Caller ID will not work correctly.
Using additional handsets
p
until the base emits a double beep. The base will remain in
d
to
Registration
is highlighted. Press Select.
Searching Base
and press Select.
d
u
or
to a new base you wish to
X.
Handset Registered
and you
37