Motorola PTX600 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Radio Motorola PTX600. Motorola PTX600 20 páginas.

Imprimir página

Call In Absence

Call in Absence only applies to keypad/display
radios, if set in radio personality, consult your
network manager.
If a call is not answered within a preprogrammed
amount of time, the call is stored by the radio.
Up to 5 calls can be stored. If the same radio calls
more than once, the call is only stored once. When 5
calls have been stored by the radio the sixth call
received overwrites the first.
When a call has been stored by the radio, tone G
will sound every ten seconds and the display will
show the identity of the calling party with the stack
index displayed on the left. The call in absence icon
will be lit to indicate there is a call in the stack.
To view/interrogate the calls in the stack press the
up or down scroll key
these keys to view any other numbers in the stack.
The most recent call stored by the radio will be
displayed first. Select the up/down scroll keys (11) to
display any other calls in the stack. If the stack is
empty tone H sounds.
To exit the call in absence interrogate mode press
the keypad edit button
Press either the PTT or
number stays in the stack until the clear button (6) is
2-Year Warranty
or
(11) and then use
(10).
key to make a call. The
#
Incoming Calls/Call In Absence/Call Diversion
pressed,
is dialled, or the personality of the
#
radio is changed.
Note: The calls in the stack are deleted when the
radio is turned off. It is not possible to call back
status calls.

Call Diversion

Incoming speech calls or status calls can be
diverted either from your radio (initiated by pressing
) or from another radio (initiated by
4
1
pressing
). On radios without a keypad
4
4
Call Diversion/Cancellation may be programmed in
the shortform dial list. Please contact your network
manager for further information.
When the radio is in the IDLE STATE, call diversion
can be initiated by pressing:
(or
)
4
1
4
(or
)
4
1
4
1
followed by the ID of the receiving radio and
Examples:
Pressing
4
1
will divert all calls from your radio to the radio with
the ID "234".
to divert all calls
to divert
speech calls/status calls
.
#
2
3
4
#
7
English