Epson LABELWORKS PX Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Epson LABELWORKS PX. Epson LABELWORKS PX 4 páginas.
También para Epson LABELWORKS PX: Manual del usuario (14 páginas)

Imprimir página

Creating Special Labels

Creating Sequentially Numbered Labels

The number is automatically incremented each time a label is printed.

Up to four digits including numbers (0 to 9) and alphabet letters (a to z and

A to Z) can be entered.

1. Press

2. Enter the start value of the sequential numbers and then press

In this example, we will enter "0001".

3. Select the number of repetition with

In this example, we will select "2 times".

4. Press

5. Select "Print copies" with

and then press

6. Enter the number of print copies and then press

In this example, we will enter "6".

7. Select "Start print?" with

and then press

Printing starts.

Creating Labels with Block Sequence Numbers Assigned

You can assign sequential numbers to blocks.

Up to four digits including numbers (0 to 9) and alphabet letters (a to z and

A to Z) can be entered.

Block 1

Block 2

Block 3

1. Create the blocks in advance.

In this example, we have created three blocks.

2. Press

3. Enter the start value of the sequential numbers and then press

In this example, we will enter "CN01".

Sequential numbers are automatically assigned to block 2 and block 3.

4. Select the number of repetition with

In this example, we will select "1 time".

5. Press

Creating Barcode Labels

MEMO

• You may not be able to add a barcode depending on the label type you create.

• Only up to two barcodes can be inserted in one label.

Supported barcode types:

EAN-8, EAN-13, CODE128, CODE39, QR CODE, ITF, CODABAR, UPC-A, UPC-E

1. Press

2. Select an item with

and press

Move on to the next options until the setting is complete.

3. Enter the alphanumeric characters for the barcode and then press

4. Press

Creating Labels with Symbol

1. Press

2. Select a category with

and press

3. Select a symbol with

and press

4. Press

MEMO

• For available symbols, see "Symbol List" on the separate sheet.

• If you transfer your original symbols from your computer, the symbols are saved in

the "Downloaded" category. For more details, see LW-PX750 User's Guide (PDF

version), which is available from http://labelworks.epson.com.

Cleaning

CAUTION

Turn o the printer and remove the batteries

before cleaning.

If the AC adapter is connected, disconnect

the AC adapter cable from the printer.

Exterior

Wipe the dirt o with a soft cloth.

If it is very dirty, use a damp cloth.

CAUTION

Never use chemicals or solvents such as

benzine, thinner, or alcohol, or use a chemical

duster.

Creating equipment labels

Simply enter the required information to create

equipment labels.

Display

and then press

1. Press

When "Overwrite text?" appears, press

2. Use

or edit text.

You can also change the default item names.

3. Press

Creating Labels to Wrap around Cable

like a Flag

This label is useful for di erentiating cables because the ag

portion of the label wrapped around the cable is easy to see.

Block 1

Text length

1. Press

2. Select the setting method of space length with

press

and then press

In this example, we will select "Length".

Dia:

Length: Sets the length by space length.

3. Enter the space length and then press

Setting range: 0.25 to 30 cm

4. Enter the text length and then press

Setting range: 0.25 to 30 cm

5. Select the type of separator with

In this example, we will select "Line".

6. Select the orientation with

In this example, we will select "Hori.2".

Hori.1

Hori.2

Vert.1

Vert.2

7. Enter the text of block 1 and then press

8. Enter the text of block 2.

9. Press

Creating Labels with Self-Lamination

Overwrap

Use the dedicated Self-Lamination Overwrap.

This label tape comes with transparent lm. The lm

can be wrapped around the label to prevent it from getting dirty.

Label length

1. Enter the label length and then press

Setting range: 1 to 99.9 cm

2. Enter the text.

3. Press

Printhead

Clean the printhead with a cotton swab.

Label

Default item

names

When you press

, you will see this area.

to move the cursor to one of the lines, then enter

Space length

Block 2

Separator

Sets the length by cable diameter.

and then press

PeelGuard

WARNING

To prevent the risk of cuts, never insert ngers in the

PeelGuard.

1. Pull out the tray.

2. Remove the tape scraps, then insert the tray

back in the printer.

Tray

Creating Labels to Wrap Around Cable

You can repeatedly print text so that it can be seen

regardless of the angle from which the cable is viewed.

Label length

Margin

1. Press

2. Select the length type with

In this example, we will select "Length".

Dia: Sets the length by cable diameter.

Length: Sets the length by label length.

3. Enter the label length and then press

Setting range: 1 to 99.9cm

4. Select On or O of repeat text with

In this example, we will select "On".

Select the type of margins with

In this example, we will select "Long".

6. Enter the text.

7. Press

Creating Multiple Labels at Once

You can create many labels at once.

and then

Label length

Margin

1. Press

2. Select the label length with

Auto: Automatically adjusts the label length depending on the length of text.

Set: Sets the label length.

Setting range: 1 to 99.9 cm

3. Enter the labels number and then press

In this example, we will enter "3".

4. Select the type of margins with

5. Select the orientation with

In this example, we will select "Hori.".

Hori.

Vert.1

Vert.2

6. Enter "Cable" and then press

Similarly for other labels, enter text and press

7. Press

Cutting rounded label corners

You can use the PeelGuard to round o

label corners.

1. Insert the tape in the tape insertion slot,

following the guide.

The tape is cut to form rounded label

corners.

Initializing the Settings

Initialize the settings if the printer does not operate normally such as the display

is interrupted.

Attention

This function initializes the settings. Take extreme care before initializing it. All the

stored text and settings you made will be lost.

1. If the power is on, press

2. Press and hold

3. When a message appears, press

The settings will be initialized.

MEMO

To cancel initialization, press a key other than

Tape width

Margin

and then press

Margin

Tape width

Labels number

and then press

Guide

to turn it o .

, and press