Motorola MCS 2000 III Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Radio portátil Motorola MCS 2000 III. Motorola MCS 2000 III 20 páginas.
Imprimir páginamodel III
NO ACKNOWLEDGE
STATUS 1
and generate a continuous tone. Press the select (13)
key to transmit the status or message again or press
the home key (3) to exit the feature.
MDC Repeater Access (RAC)
MDC repeater access will select a repeater for trans-
mission. Consult your system administrator for more
information.
Trunking Functions
Sending a Call Alert Page
Select the menu PAGE as previously described, then
either enter the ID via the keypad or use the mode
selector (D) to display the desired ID from the ID list.
Press the PTT (F) or the select button (13) to send the
Call Alert Page.
The call alert page acknowledgement tone is heard if
the called radio receives the call alert page. If the page
is not received the display will show
NO ACKNOWLEDGE
ID: 700001
MCS 2000 Models II & III
model II
NO ACKNOWLEDGE
NO ACKNOWLEDGE
Press the home button (3) or the menu button (9) twice
to return to the home display.
Receiving a Call Alert
When a call alert is received, the call alert received
tone is heard, the green LED and the
the display until the Call Alert is acknowledged by
pressing the PTT (F) or pressing and releasing the
monitor button (2).
Status/Message
Operated as previously described under "Conven-
tional Functions".
Reprogram Request
If dynamic regrouping is programmed into your radio,
the reprogram request function may be selected either
via a pre-programmed button or through a menu. A
reprogram request will send a message to the console
operator requesting that the operator assign the radio
to a new talkgroup. See your system administrator for
further details.
One Touch Button Functions
If this optional feature is programmed in your radio, a
button may be dedicated to sending a pre-pro-
grammed status, message, call alert or dialing a pre-
icon flash in
68P81083C49-B
page 15