Motorola 202T Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Módem Motorola 202T. Motorola 202T 14 páginas. Setting a modem

INTUITY AUDIX LX Release 1.0

Centrex Integration

Setting the 202T Modem

202T Modem Types

You can install either one of the following 202T modem types with the I

AUDIX system:

However, the modem at the service provider switch may be different, though the

commonly-supported modems at the service provider switch include the following:

When you install at Motorola 202T modem with the Intuity AUDIX system, the

modem at the service provider switch must always be set to the default options. If

the Intuity AUDIX modem is an AT&T Dataphone 202T, the modem options at the

service provider switch may differ. See

Switch on page

The manufacturer's name appears on the faceplate of the unit.

Setting Options for the 202T Motorola

Modem

The Motorola 202T modem contains 14 jumpers that must be correctly set. Use

this procedure to set the jumpers.

1. To remove the top cover from the Motorola 202T modem, complete the

Motorola 202T modem

AT&T Dataphone 202T modem

General DataCom 202T modem

Rexon 202T modem

NEC 202T modem

6-11.

following Steps a through f:

NOTE:

Installers in Canada may need to use a screwdriver to remove a

screw through the top rear panel or to remove tabs located between

the cover latch and the bottom plate.

a. Turn the modem on its side.

b. Place your thumbs on the blue tabs and your fingers on the edge of

the cover

(Figure

Modem Settings for the Service Provider

6-1, View 1).

Issue 1

May 2002

Page 6-2

™

NTUITY