Motorola SM56 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Módem Motorola SM56. Motorola SM56 22 páginas. Software modem
También para Motorola SM56: Manual de inicio rápido (13 páginas), Manual de inicio rápido (48 páginas), Manual de referencia de comandos At (42 páginas)

5. When your selections are complete click OK.

6. You will be prompted to restart the computer, do not do so yet. Select Don't Restart Now.

7. Close the Ports window.

Step 2 -- Install the SM56 modem software

1. Open the Windows NT Control Panel.

2. Double click the Modems icon....the Install New Modem dialog appears.

3. Click the "Don't detect my modem; I will select it from a list" check box. Then click Next.

4. Click the Have Disk button.

5. Browse to the Windows NT SM56 modem install software. Click misgmodm.inf to highlight

it. Then click Open, then click OK.

6. Select the Motorola SM56 Modem (note that the product name listed will vary depending on

which modem you have -- Data/Fax/, Data/Fax/TAM, etc.) from the list. Click Next.

7. Click the port number selected in Step 1 above to highlight it as the COM port for the modem.

Then click Next. The wizard will now copy all the necessary files and install the SM56 modem

on your PC.

8. When complete, restart the PC to activate and start the COM port and SM56 modem devices.

You are now ready to use the modem.

Verifying Proper Modem Installation

Verify that the SM56 software and hardware installation has completed correctly as follows.

Verifying SM56 Software Installation

1. Verify correct COM port selection.

You can check COM port installation through the Modems icon in the Control Panel or through

the SM56 Control Panel application (see below). Normally, the SM56 will install on COM2,

COM3, or COM4. Sometimes, however, depending on your computer system setup or Windows

setup, the SM56 may install on COM5 (or higher). Although the modem functions correctly on

any COM port, many software applications do not work if the modem is on a COM port number

higher than 4. If the SM56 installs on COM5 (or higher), you can force it to a lower COM port

via the SM56 Control Panel applet.

2. Run modem diagnostic from the SM56 Control Panel.

The SM56 software modem provides an informative Control Panel application that reports:

•

Modem status: in use/not in use; dialing; negotiating a connection; actual connect rate

(updated in real time during a connection).

3F8

2F8

3E8

2E8