Motorola SURFboard SB5102 Seguridad e información reglamentaria
Navegue en línea o descargue pdf Seguridad e información reglamentaria para Módem Motorola SURFboard SB5102. Motorola SURFboard SB5102 4 páginas. Software license, warranty, safety, and regulatory information
También para Motorola SURFboard SB5102: Manual del usuario (47 páginas), Hoja de especificaciones (2 páginas), Manual de instalación rápida (2 páginas)
Imprimir página
Software License, Warranty, Safety, and Regulatory Information
SB5102 Cable Modem
SAFETY AND REGULATORY INFORMATION
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. THE DEVICE SHALL
NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON
THE DEVICE.
CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES.
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT ELECTRICAL SHOCK, DO NOT
PLUG THE POWER ADAPTER OR UPS INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION
AND TROUBLESHOOTING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damaging the
equipment by local lightning strikes and other electrical surges.
This product was qualified under test conditions that included the use of the supplied cable between system components. To be in
compliance with regulations, the user must use this cable and install it properly.
Different types of cord sets may be used for connections to the main supply circuit. Use only a main line cord that complies with
all applicable product safety requirements of the country of use.
Installation of this product must be in accordance with national wiring codes.
To prevent overheating, do not block the ventilation holes on the sides of the cable modem.
Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use
forced air to remove dust.
This device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that
comes with the product.
Be sure that the outside cable system is grounded, so as to provide some protection against voltage surges and built-up static charges. Article 820-
40 of the NEC (Section 54, Part I of the Canadian Electrical Code) provides guidelines for proper grounding and, in particular, specifies the
CATV cable ground shall be connected in the grounding system of the building, as close to the point of cable entry as practical.
When you see this symbol on a Motorola product, do not dispose of the product with residential or commercial waste.
Recycling your Motorola Equipment
Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for
information about practices established for your region. If collection systems are not available, call Motorola Customer Service for
assistance.