Epson TM-H6000II Manual - Página 3

Navegue en línea o descargue pdf Manual para Etiquetadora Epson TM-H6000II. Epson TM-H6000II 13 páginas. How to connect printer with a wireless adapter
También para Epson TM-H6000II: Folleto (2 páginas), Folleto (2 páginas), Manual del usuario (15 páginas), Manual de instrucciones (12 páginas)

Imprimir página
Epson TM-H6000II Manual
How to connect an Epson POS printer with Ethernet Interface
(Key: DIP SW2-8 On: refers to slide switch number 8, on switch bank 2, is turned On)
Cabling
Use a regular LAN patch cord to connect the printer to the LAN.
Getting initial printer and Ethernet adapter settings
Get the initial settings of the Ethernet adapter. Run the printer self test (hold down the feed button while turning on the
printer). The printer will print a list of initial settings including interface type and buffer capacity. verify that the interface is
"Ethernet"
A similar test can then be done on the UB-EO2 adapter by inserting a paperclip through the small hole in the adapter for 3
seconds.
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
RJ-45 Female
(connector on computer and adapter end)
Ethernet cards use CAT5/6 patch cords
(Type IV)