Epson 1250 - Perfection Photo Flatbed Scanner Manual básico - Página 42

Do not let the power cord become damaged or frayed.

If you use an extension cord with the scanner, make sure the total ampere rating of the devices

plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total

ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere

rating. Do not place multiple loads on the electrical outlet.

Never disassemble, modify, or attempt to repair the scanner, AC adapter, power cord, or optional

equipment.

Avoid places subject to shocks and vibrations.

Do not block or cover the openings in the scanner's cabinet. Do not insert objects into any

openings as they may touch dangerous voltage points or short out parts.

Unplug the scanner and refer servicing to qualified service personnel under the following

conditions:

If the power cord or plug is damaged; if liquid has entered the scanner or AC adapter; if the

scanner or AC adapter has been dropped or the case damaged; if the scanner or AC adapter does

not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are

not covered by the operating instructions.)

For US and Canadian users:

Use only the included power cord or a 6 to 10 foot long UL-approved type SPT-2, 2 x 18 AWG

cord with a 125 V, 10 A polarized plug and 125 V, 7 A connector.

The AC adapter is equipped with a polarized alternating-current line plug (a plug having one

blade wider than the other) and polarized power inlet. These plugs only fit into a power outlet in

one way. This is a safety feature. If you are unable to insert the plug properly, try reversing the

plug. If the plug still fails to fit, contact an electrician to replace your outlet. Be sure to use only the

polarized AC cord that comes with the scanner.

NERGY

As an ENERGY STAR Partner, EPSON has determined that this product

meets the ENERGY STAR guidelines for energy efficiency. The EPA

ENERGY STAR office equipment program is a voluntary partnership with

the computer and office equipment industry to promote the introduction

of energy-efficient personal computers, monitors, printers, fax machines,

and copiers in an effort to reduce air pollution caused by power generation.

Requirements and Notices

Compliance

TAR