Epson 1640XL - Expression Graphic Arts Información sobre el producto - Página 4

Imprimir página

Epson 1640XL - Expression Graphic Arts Información sobre el producto

EPSON Expression 1640XL

Scanner indicator lights

Light

status

Color

OPERATE

Green

READY

Green

F (flashing)

Green

ERROR

Red

F (rapidly

flashing)

N = on, O = off, F = flashing

Error conditions

ERROR

READY

light

Error type

Command error: The scanner has received

incorrect commands from your scanning

software. Try rescanning the document.

Interface error: Check that your scanner is

securely connected to your computer, and then

turn the scanner off and back on again.

Fatal error: Check that the transportation lock is

released, and then turn the scanner off and on

again. If this doesn't solve the problem, call your

EPSON dealer.

Option error: There's a problem with an installed

option. Check to make sure the transparency unit

or automatic document feeder is flat against the

document table. Check that your option is

securely connected to the option (ADF/TPU)

connector at the back of the scanner. Finally,

check that the automatic document feeder isn't

out of paper and doesn't have a paper jam. If

these suggestions don't solve the problem, call

your EPSON dealer.

N = on, O = off, F = flashing

Scanner buttons

Button

Function

Operate

Turns the scanner on and off.

Reset

Resets the scanner to its default settings after an error.

Pressing this button while scanning a document stops

the scanner and may cause an error.

]

Automatically launches a ] Start button-compatible

Start

application. You must set up your scanner software and

a compatible application to use this button.

If you installed Presto! PageManager, it's automatically

assigned to the ] Start button. You can set up Presto!

PageManager to scan your image automatically and send

it directly to another application or a peripheral device,

such as a printer.

4 - EPSON Expression 1640XL

Scanner status

Scanner is on

Ready to scan images

Scanning is in progress

An error occurred; see the

following table for more

information

Transporting the Scanner

When you transport the scanner a long distance or store it for

an extended time, follow the steps below to secure the

carriage.

1. Make sure the transportation lock on the back of the

scanner is in the

home position

2. If you're using a transparency unit or automatic document

feeder, remove it and replace the scanner cover.

3. Turn on the scanner and wait until the carriage moves to

the home position as shown. Then turn off the scanner.

4. Slide the transportation lock at the back of the scanner to

the

position.

locked position

If the carriage does not automatically return to the home

position, slowly raise the front of the scanner and hold it up

until the carriage comes to rest in the home position. Then

turn the transportation lock counterclockwise to the

position.

If you are using a transparency unit and it is switched on,

the scanner carriage will not move to the home position.

Remove the transparency unit first, then perform the

steps above.

8/00

position.