Epson 1815p - PowerLite XGA LCD Projector Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Software Epson 1815p - PowerLite XGA LCD Projector. Epson 1815p - PowerLite XGA LCD Projector 27 páginas. Release of check tool for network projectors v1.00 for windows
También para Epson 1815p - PowerLite XGA LCD Projector: Manual del usuario (42 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (47 páginas), Configuración rápida (2 páginas), Manual del usuario (1 páginas), Manual de funciones (5 páginas), Manual de software (2 páginas), Declaración de conformidad (4 páginas), Lista de piezas (1 páginas), Boletín de asistencia sobre productos (45 páginas), Boletín de asistencia sobre productos (25 páginas), Boletín de asistencia sobre productos (22 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (41 páginas), Boletín de asistencia sobre productos (34 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (15 páginas), Boletín de asistencia sobre productos (22 páginas)

Imprimir página

Epson 1815p - PowerLite XGA LCD Projector Manual del usuario

PowerLite 1810p/1815p

The projector beeps once and the

as the projector warms up, then an image begins to appear.

When the

light stops flashing and remains green, the

Power

projector is ready for use.

4. If you are prompted to enter a password, see page 9.

Warning:

Never look into the lens when the lamp is on. This can damage your

eyes and is especially dangerous for children.

Using the Direct Power On Function

The Direct Power On function enables faster setup. The

projector starts up automatically when you plug it in or turn it

on with a wall switch. You don't have to press the P

button.

Follow these steps to enable Direct Power On:

1. Press the

button on the remote control or projector

and select the

Extended

2. Choose

and press

Operation

3. Choose

Direct Power On

4. Highlight

and press

5. Press

to exit. The setting will take effect the next time

you plug in the projector.

Note: If a power outage occurs when Direct Power On is enabled

and the projector is plugged in, the projector will start when the

power is restored.

Shutting Down the Projector

This projector incorporates Instant Off technology. To turn it

off, you can press the P

Power

power switch that supplies power to the projector. You don't

have to wait for the projector to cool off first.

1. To turn off the projector, press the P

remote control or projector. You see a confirmation message.

If you don't want to turn it off, press any other button.

2. Press the P

button again. The projection lamp turns

Power

off and you can unplug the power cord.

PowerLite 1810p/1815p

light flashes green

Power

menu.

Enter

and press

Enter

button, unplug it, or turn off a

button on the

Power

If you want to turn the projector on again, make sure the

orange

light is not flashing, then press the P

Power

button.

Note: Turn off this product when not in use to prolong the life of

the projector. Lamp life results vary depending on the mode selected,

environmental conditions, and usage.

Sleep Mode

You can set the projector to automatically turn off the lamp and

enter "sleep mode" when it has not received any signals for up

to 30 minutes. This conserves electricity, cools the projector,

and extends the life of the lamp. You can enable sleep mode in

the Extended menu under

projector, unplug the power cord. If you want to start

projecting again, press the P

Troubleshooting Display Problems

You Can't Project an Image

If you don't see the image you are trying to project, try the

following:

❏ Make sure the cables are connected correctly.

❏ Make sure the

Power

A/V mute slide (lens cover) is open.

❏ If you've connected more than one computer and/or video

source, you may need to press the

the projector's control panel or

remote control to select the correct source. (Allow a few

seconds for the projector to sync up after pressing the

button.)

❏ If you're using a PC notebook, see below.

The Projector and Notebook Don't Display the

Same Image

If you're projecting from a notebook, and you can't see your

image on the projection screen and on your computer at the

same time, follow these guidelines:

If you're using a PC notebook:

❏ On most systems, there's a function key that lets you toggle

between the LCD screen and the projector, or display on

both at the same time. It may be labeled

an icon such as

key while pressing it. Allow a few seconds for the projector to

sync up after changing the setting.

❏ If the function key doesn't permit you to display

simultaneously on both screens, you should check your

monitor settings to make sure both the LCD screen and the

external monitor port are enabled.

3/08

. If you are done using the

Operation

button.

Power

light is green and not flashing and the

Source Search

button on the

CRT/LCD

. You may have to hold down the

Power

button on

or have