Epson 2090 - LQ B/W Dot-matrix Printer Manual del usuario - Página 42
Navegue en línea o descargue pdf Manual del usuario para Software Epson 2090 - LQ B/W Dot-matrix Printer. Epson 2090 - LQ B/W Dot-matrix Printer 48 páginas. Epson lq-2090: product brochure
También para Epson 2090 - LQ B/W Dot-matrix Printer: Manual (11 páginas), Resumen técnico (7 páginas), Especificaciones (2 páginas)
Imprimir página
Light status
F Pause
F Paper Out
F Pause
F F Tear Off/Bin
F F F Font light
F F F Pitch light
= On,
= Flashing
O
F
= Three beeps,
Clearing Paper Jams
1.
Turn off the printer and open the printer cover.
2.
If continuous paper is jammed in the printer, tear off the fresh
supply at the perforation nearest the paper entry slot.
3.
Turn the knob on the left side of the printer counterclockwise to
remove the paper in the printer and any torn pieces of paper.
Caution:
c
Use the knob on the left side of the printer to clear paper jams only
when the printer is off. Otherwise, you may damage the printer or
change the top-of-form or tear-off position.
4.
If the paper is stuck where the printer ejects it, gently pull the paper
out of the printer.
5.
Close the printer cover and turn on the printer. Make sure the
Paper Out light is not flashing and the Pause light is off.
42
Troubleshooting
Beep
Problem
pattern
Solution
—
The print head is overheated.
Wait a few minutes; the printer resumes printing
automatically once the print head cools.
An unknown or serious printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again.
= Five beeps