Epson 410W - PowerLite WXGA LCD Projector Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Software Epson 410W - PowerLite WXGA LCD Projector. Epson 410W - PowerLite WXGA LCD Projector 42 páginas. Remote control information
También para Epson 410W - PowerLite WXGA LCD Projector: Manual de configuración rápida (6 páginas), Manual de instrucciones (47 páginas), Manual del usuario (1 páginas), Especificaciones (2 páginas), Declaración de conformidad (4 páginas), Manual del usuario (2 páginas), Lista de piezas (1 páginas), Boletín de asistencia sobre productos (25 páginas), Boletín de asistencia sobre productos (22 páginas), Boletín de asistencia sobre productos (28 páginas), Boletín de asistencia sobre productos (41 páginas), Boletín de asistencia sobre productos (15 páginas), Boletín de asistencia sobre productos (22 páginas), Manual de instalación (5 páginas)

Monitoring window layout

*1 When Temperature level display group view is set to On at Environment

setup in the Tool menu, an icon indicating the internal temperature of the

projector will be displayed on top of the projector icon. The default setting

is Off.

*2 Check the following items.

- Check that the projector's power is turned on.

- Check that the LAN cable is connected.

- Check that Network Monitoring is set to ON or Standby Mode is set to

Network ON in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 You can display Replace lamp at any time preset at Environment setup in

the Tool menu.

• The projector information that is generated when a problem is detected

is stored until EMP Monitor is closed. EMP Monitor displays will not

be updated automatically even if the projector status returns to normal.

Click "Refresh" in the main window to update the status.

• Detectable error information differs with the projector you are using.

Selecting display items

You can select only the required items to be displayed in Detail list view.

Procedure

Select "Option" from the View menu.

The Option window will be displayed.

Select the check box of the item you want to display.

Click "OK".

When all of the details of the item cannot be displayed in

Detail list view, drag the boundary line on the right of the

item name so that the view is extended to the desired width.