Epson 745c - PowerLite XGA LCD Projector Manual - Página 11

Imprimir página

Epson 745c - PowerLite XGA LCD Projector Manual

Depending on whether your projector is set up to

connect in Ad Hoc mode or Access Point mode (also called

infrastructure mode), you see this screen:

3. If you've already configured the projector for your wireless

network, go to "Projecting Wirelessly" on page 15.

Otherwise, continue with the next section.

Configuring the Connection

You must configure both the projector and your computer's

network settings to project wirelessly.

You can configure the projector for either of the following

modes:

Ad Hoc mode: Lets you connect just one computer at a time;

you need a computer with a wireless (802.11g or 802.11b)

network card or adapter, or a Macintosh with an AirPort

AirPort Extreme card.

Access Point mode: Lets multiple computers access the

projector, or trade off control of the projector; you need a

wireless (802.11g or 802.11b) access point or an AirPort (or

AirPort Extreme) base station, and one or more computers

with wireless network cards or adapters.

1. Switch the projector to EasyMP mode and insert the Epson

802.11G/B card.

2. When you see the EasyMP screen, press the

on the remote control to select

3. Use the

pointer button to highlight

, the press

Wireless LAN

4. Select either

Easy connect mode

point mode

button

Enter

Config

under

Basic

Enter

(for Ad Hoc) or

Access

You see one of these screens:

5. Make sure the projector has a unique name so you can

identify it when connecting to it from your computer.

Use the

highlight the Projector Name text box, then press

The text box turns yellow to indicate you're in input mode.

Press the

in alphabetical order, or down to select letters in reverse

order. Then press the

move to the next character position. When done entering a

new setting, press

To enter numbers, press and hold the

remote control while pressing number buttons on the

numeric keypad. (The button lights up to indicate that the

numeric keypad is active.) Press the

exit numeric keypad mode. When done entering the

setting, press

8/04

Epson PowerLite 745c Projector

pointer button on the remote control to

pointer button up to select individual letters

pointer button to the right to

Enter

Num

Enter

Epson PowerLite 745c Projector

Ad Hoc

mode

Access

Point

mode

Enter

button on the

button again to