Epson 745c - PowerLite XGA LCD Projector Manual - Página 19

Imprimir página

Epson 745c - PowerLite XGA LCD Projector Manual

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the

projector name, and click

5. Click

. You see the status of each of your registered

projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors

using the Status, Video Source, and Error icons shown below.

These let you see which projectors are currently being used,

from which source (or port) they are projecting an image, and

if a problem occurs.

Status icon

Video Source icon

Note: To monitor a projector when it's in standby mode (plugged

in but not projecting), you must first select

setting in the projector's Extended menu.

Standby Mode

For detailed status information, select the projector and click

View details

Delete

Error icon

as the

Network ON

Epson PowerLite 745c Projector

The following tables explain the status, video source, and error

icons. (Additional unsupported icons also appear.)

Status icons

(green)

(dark)

(green)

(dark)

Video source icons

Error icons

8/04

Projecting; no problems

Turned off; no problems

Projecting; problems detected

Turned off; problems detected

Network error (for example, not connected to

network or power cable disconnected).

You may also see this error if Network OFF is

selected in Standby Mode.

Computer/Component 1

Computer/Component 2 (not available for the

PowerLite 745c)

S-Video

Video

EasyMP

Lamp replacement notification (the lamp is

nearing the end of its life; see page 22)

High-speed cooling in progress (the

projector is getting too hot but continues to

operate)

Overheating (projection turned off

automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Internal problem

Epson PowerLite 745c Projector