Philips 1465TS Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para TV Philips 1465TS. Philips 1465TS 17 páginas. Color televisio

Imprimir página

1. Hotel Mode

Tips for tuning

Changing the pr

of a television channel

Press the N and Q buttons together to get the

installation menu on the screen.

Press the menu + button to get the manual store

menu on the screen.

Select the channel you want to change by

pressing the P+, P- or the 0 to 9 buttons.

Press the N and Q buttons together again to

make the programme number flash.

Press P+, P- or the 0 to 9 buttons to enter the

programme number you want to give to that

channel. You can't use 0 because it is reserved for

the scart (AV) channel.

Press the N and Qbuttons together once more

to make 'stored' appear. The television has now

stored the television channel on the programme

number you have chosen.

Repeat steps 3 to 6 if you want to change the

programme numbers of other channels.

Press the menu button twice to get back to

normal viewing. (You can turn off any of the

on-screen displays by pressing the menu button

several times.)

Picture interference from other

equipment

If you have used the aerial lead to connect a video

recorder, satellite receiver or other piece of equipment,

switch the equipment on one piece at a time and

Features on the television

Main po wer

switch

–

Menu adjustments

ogramme number

Please read 'Switching the television on and off' on page 2.

Keep pressing the menu button to display the symbols for the items you can

adjust: a (volume), A (brightness), B(contrast), R (sharpness), C (colour)

and C (the timer). If you don't make any adjustments, the menu display will

automatically disappear after 10 seconds.

When there is no symbol shown on the screen, the - button selects the previous

programme number and the + button selects the next programme number.

Volume is for making the sound louder or quieter. Brightness, contrast,

colour and sharpness are picture adjustments. Your television displays a bar to

show the adjustment. Press + to increase the item you are adjusting, and the bar

will get longer. Press – to reduce the item you are adjusting, and the bar will get

shorter.

check the picture on all your programmes. The pieces

of equipment that are not switched on must be on

stand-by. If any of your programmes have wavy lines

on the picture when the equipment is switched on,

you will have to change the output frequency of the

equipment. Please read the instruction book for the

equipment to find out how to do this. Change the

output frequency a little at a time (or in 8MHz steps)

and keep checking all your programmes.

When there are no wavy lines (or other interference)

on any of the pictures, re-tune the programme

number that you have chosen for your equipment (see

'Tuning in the programmes', on pages 2 to 3).

Do the same for each piece of equipment, but after

you've finished with each one, leave it switched on

while you check the next piece of equipment.

Continue until you have all the pieces of equipment

working together without interfering with each other.

If you cannot get rid of the interference, you may

have to connect the equipment with a scart cable, (see

'How to connect scart cables' on page 8-9).

Changing channels without leaving

the installation mode

As long as the programme number is not flashing,

you can change channels while the installation menu

is still on the screen.