Epson 7900p - PowerLite XGA LCD Projector Información sobre el producto - Página 17

Navegue en línea o descargue pdf Información sobre el producto para Software Epson 7900p - PowerLite XGA LCD Projector. Epson 7900p - PowerLite XGA LCD Projector 24 páginas. Supplemental / late breaking information
También para Epson 7900p - PowerLite XGA LCD Projector: Manual del usuario (42 páginas), Manual de instrucciones (36 páginas), Piezas de recambio (1 páginas), Configuración rápida (2 páginas), Manual del usuario (1 páginas), Resumen técnico (7 páginas), Boletín de asistencia sobre productos (7 páginas), Instalación de la lente (5 páginas)

Imprimir página

Epson 7900p - PowerLite XGA LCD Projector Información sobre el producto

The following tables explain the status, video source, and

error icons.

Status icons

(green)

Projecting; no problems

(dark)

Turned off; no problems

(green)

Projecting; problems detected

(dark)

Turned off; problems detected

Network error (for example, not connected to

network or power cable disconnected).

You may also see this error if Network OFF is

selected in Standby Mode.

Video source icons

Computer, Computer1, or InputA

Computer2 or InputB

S-Video

Video

D4 (Digital)

DVI or HDMI (Digital)

Error icons

Lamp replacement notification (the lamp is

nearing the end of its life; see page 21)

High-speed cooling in progress (the

projector is getting too hot but continues to

operate)

Overheating (projection turned off

automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Epson PowerLite 7900p Projector

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor

screen let you turn the projectors on and off and select video

sources. (Hold the mouse pointer over a button to see a

description of its meaning.) Make sure you've selected the

projector(s) you want to operate before clicking one of the

buttons.

Note: To turn on a projector when it's in standby mode (plugged in

but not projecting), you first select

setting in the projector's Advanced1 menu.

Mode

Configuring the Monitoring Interval

If you need to have the most current status information about

your projectors, click the Refresh button in the EMP

Monitor screen.

You can also select how often EMP Monitor checks the

projector status:

1. From the Tool menu, select

screen.

Note: If you want EMP Monitor to run whenever you start

your computer, click

2. Select the desired update interval and click

9/04

Epson PowerLite 7900p Projector

Control buttons

as the

Network ON

. You see this

Configuration

Add to Startup

Standby