Epson 875DC - Stylus Photo Color Inkjet Printer Información sobre el producto - Página 12

Navegue en línea o descargue pdf Información sobre el producto para Software Epson 875DC - Stylus Photo Color Inkjet Printer. Epson 875DC - Stylus Photo Color Inkjet Printer 13 páginas. Stylus photo 875dc
También para Epson 875DC - Stylus Photo Color Inkjet Printer: Especificación (2 páginas), Boletín de asistencia sobre productos (1 páginas), Manual complementario (2 páginas), Boletín de asistencia sobre productos (3 páginas), Manual del usuario (36 páginas), Primeros pasos (2 páginas)

EPSON Stylus Photo 875DC

3. Remove all the paper from the sheet feeder.

4. Clean the exterior of the printer with a soft, damp cloth.

5. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use a hard or abrasive brush, or alcohol or thinner

for cleaning; they can damage the printer components

and case.

Don't get water on the printer components and don't

spray lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or one of a similar size.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

Follow these steps:

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the USB cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

Tape the ink cartridge holder

to the printer case

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it.

13 - EPSON Stylus Photo 875DC

After transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline in

print quality, clean the print head (see page 11); if output is

misaligned, align the print head (see page 12).