Epson EMP 7800 Manual de consulta rápida - Página 5

Navegue en línea o descargue pdf Manual de consulta rápida para Software Epson EMP 7800. Epson EMP 7800 16 páginas. Projector
También para Epson EMP 7800: Hoja de referencia de inicio rápido (7 páginas), Manual de introducción (10 páginas), Especificaciones (4 páginas), Manual del usuario (24 páginas), Manual del usuario (25 páginas), Manual del usuario (25 páginas), Folleto y especificaciones (4 páginas), Manual del usuario (28 páginas), Manual del usuario (28 páginas)

Imprimir página

Epson EMP 7800 Manual de consulta rápida

Select the images to be projected.

If only one signal source is connected, images from that source will be projected automatically.

If more than one device is connected to the projector, use the [Source] button to select the image source to be projected.

To select images to be

projected while viewing

all images being input

(Preview Function)

If the source does not

change to a laptop PC

If using the

buttons to select the source, you can change the signal setting by

pressing the button repeatedly.

Active window

Computer (Analog-RGB)

Computer

DVI

BNC

Video

S-Video

Examples of changing output

NEC

Panasonic

TOSHIBA

IBM

SONY

FUJITSU

After startup, change the Control

Macintosh

Panel adjustments so that mirroring

is active

1. Press the

button.

The image can be changed directly by selecting the desired

image source with the [Source] button.

2. To view the images in more detail, switch to the active window.

Tilt the

button to select an image and then press the

button.

3. Project the images in the active window.

Press the

button.

User's Guide "Selecting an Image Source While

Viewing Projected Images (Preview Function)"

You may need to change the output destination using the

keyboard or by changing settings.

To change, hold down the

(with a symbol such as

Once the setting is changed, projection will start after a short

period.

If images are still not projected after carrying out the above,

see p.12.

key and press the

key

on it).

Computer documentation