Epson EMP-8100 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Software Epson EMP-8100. Epson EMP-8100 14 páginas. Esc/vp level 6 serial communication manual
También para Epson EMP-8100: Especificaciones (1 páginas), Manual de comunicaciones (20 páginas)
Imprimir página
Registering projectors for monitoring
Registration using IP address (Manual registration)
PROCEDURE
1
Click [Manual registration] in the [Register projector]
dialogue box.
2
Enter the IP address for the projector to be registered
in the [IP address] box, and then click [Confirm].
If a projector with the specified IP address is found on the
network, the projector's name will be displayed, so check that it
is the target projector. If it is not the target projector, re-enter
the IP address.
When using EMP-81/61
The following "Manually register projector" window will be
displayed.
Complete the form and click [Confirm].
Projector name
IP address
Use Serial⇔TCP/IP
conversion adaptor.
Port Number
Enter the port number.
Click to check the box.
3
Click [Add].
TIP
If a password entry screen is displayed, enter the password for the
projector's Administrator and then click [OK].
Enter the projector name of up to 16
alphanumeric characters, from 0 to 9
and from A(a) to Z(z) and - . You cannot
use a numeric-only name.
Enter the IP address of the projector.
Check the box.
Enter the port number.
Enter the projector name.
Enter the IP address.
6