Ariel Whirlpool BT series Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Bañeras Ariel Whirlpool BT series. Ariel Whirlpool BT series 10 páginas.

User manual whirlpool D-series with Bluetooth

Turn on/off the display:

The system is "standby" when the whirlpool connected to the power network.

If the system is on "standby" state, the on/off symbol is visible on the dark screen. If touch any of the buttons on the screen will

activate the backlight with 50% strength. Turn on the system by pressing the power supply button on the control panel for three

seconds. The current temperature (°C) will appear on the display. The temperature sensor is located below the overflow.

The timer set to 2 hours, all functions will automatically turn off after the expiry of this time, and the whirlpool will go into the "standby"

mode.

To turn off the system, press the power supply button on the display again.

Water pump: (F= 1~9 Force)

The water pump only works when the water is above the temperature sensor. Keep in mind that the whirlpool has two sensors. One

sensor for the water level is behind the acrylic and not directly visible. The temperature sensor is visible in the whirlpool.

Press the water pump button to activate the pump. If the water is not above the water level sensor, the pump button will flash, but

the pump will start automatically when the water go above the water level sensor. The standard operating time of the water pump is

20 minutes. If the water pump and air pump both work but with a different start time, both pumps will automatically turn off after 20

minutes. To stop the water pump, press the water pump button for two seconds. On the display you can see "off".

To be able to adjust the water force, the water pump has to be working. Press the SET button until you see "F=" on the display.

Press the parameter setting keys to select a force level between 1 and 9. Force 1 is the most soft water pressure, force 9 the most

powerful.

Underwater light: (C= 1~7 Colour)

The underwater light colour is variable and adjustable in strength. Press the light button to turn on the underwater light. The light color

is white (C=1). To change the colour of the underwater light, press for the 2nd time on the light button and the light will show

automatically the 7 different colors C=1 to C=7. To set the desired colour, press for the 3

colour appears. To turn the light off, press the light button for the 4th time.

To change colour manually, press the Set button and use the parameter setting buttons to switch manually between the available

colours. If you want to switch off the lights, press the light button.

Brightness underwater light: (B= Brightness)

With the light activated, you can change the brightness in three levels of intensity by pressing the brightness button. The light will

appear in the most bright setting B=3 and can be dimmed to B=1 or B=2 by pressing the brightness button or the parameter setting

buttons.

time on the light button when the desired

Page 5 / 9