Toshiba 22J2AVSG-UA Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Aire acondicionado Toshiba 22J2AVSG-UA. Toshiba 22J2AVSG-UA 16 páginas.
Imprimir página
WEEKLY TIMER OPERATION
24
How to set WEEKLY TIMER
1. Press
2. Press
The sequence of day symbol appears on the LCD.
PRESET
TEMP.
SU
3. Press
● The program 1 is ready for setting while
pressed PG-1 appears on the LCD.
● Press
the sequence program 1 to program 4.
4. Press
● The time can be set between 0:00 and 23:50 in
10 minute intervals.
● Press and hold the button to change setting time
for 1 hr.
● Only one of ON or OFF timer can be set on each
program.
ON timer display
* OFF timer is used to stop the air conditioner only.
The display does not show Operation mode,
Temperature, Fan speed and others.
5. Press
6. Press
TEMP.
● The temperature can be set between 17°C and
30°C.
7. Press
8. Add operations, if required.
● Press
(Notes: Fireplace cannot select and memorize in
weekly function)
● Press
● Press
● Press
9. Adding or editing the program.
The program can be set to perform on all the required
days until
10. If adding or editing a program is required, please
repeat steps 2 - 8 before setting confi rmation.
11. After adding or editing, press
setting*.
Weekly timer running
Next program
Timer ON or OFF
Next operation time
to enter WEEKLY TIMER setting.
Blink
to select desired day in sequence.
MO
TU
WE
TH
FR
SA
WEEKLY SUMO
TUWETHFRSA
(All day)
to select the program number.
to change the program number in
PG-1
PG- 2
PG-
3
PG-
4
or
to select the desired time.
OFF timer display*
to select desired operation.
or
to select desired temperature.
to select the desired fan speed.
to use 8°C operation.
to use ECO operation.
to use Hi POWER operation.
to use Silent operation.
is pressed to confi rm the setting.
to confi rm the
Operating Mode
Display after
pressing SET
button
Operating Temperature
and Fan speed
* Point remote control at air conditioner receiving
Notes :
1. Place the remote control where the indoor unit can receive the signal.
This will increase the accuracy of the timing between the remote control
and the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In
this situation, the air conditioner will fi rst follow the normal timer until it is
complete; then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi POWER, ECO and etc., can be adjusted but when the clock
reaches the program setting, the operation will return to the set items in
the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
Edit Weekly timer program
is
To edit the program after confi rming the weekly timer
setting, follow steps 1 - 3 below.
1. Press
2. Press
PRESET
TEMP.
3. Press
Deactivating WEEKLY TIMER operation
Press
LCD.
● The "WEEKLY" indicator will disappear from the
● The TIMER lamp goes off.
● To reactivate the WEEKLY TIMER operation
To delete programs
The individual program
1. Press
2. Press
PRESET
3. Press
TEMP.
4. Press
All programs
1. Press
2. Press
Notes :
Make sure the remote control receiving module
on the air conditioner receives the signal from the
remote control.
module then, press SET button until you hear the
"PiPi" sound. This means the setting operation has
been completed. As the air conditioner is receiving
the signal, you will hear separate "Pi" sounds
corresponding to the number of days in the selected
setting.
An incomplete setting is indicated if the TIMER lamp
is blinking. Press
twice.
.
● The day of the week and the program number of
the current day will be displayed.
to select the day of the week and
press
to select program number to be
confi rmed.
● Resetting the operation.
to exit confi rming mode.
while "WEEKLY" is displayed on the
LCD. However, the program will remain in the
remote control.
again, press
again, LCD shows the
next program. The program, after reactivation, is
related to the clock time.
.
● The day of the week and the program number
is displayed.
● Select the day to delete the program.
to select the program number to be
deleted.
.
● ON or OFF timer will be cleared and the LCD
will blink.
to delete the program.
● Press
while the LCD is blinking.
The program has now been deleted.
.
● The day of the week and the program number
will be displayed.
and hold for 3 seconds.
● All programs will be deleted and LCD displays
current operation.
EN