Epson PowerLite 1716 Configuración rápida
Navegue en línea o descargue pdf Configuración rápida para Software Epson PowerLite 1716. Epson PowerLite 1716 2 páginas. Product brochure
También para Epson PowerLite 1716: Manual de instrucciones (47 páginas), Lista de piezas (1 páginas), Declaración de conformidad (4 páginas), Folleto (2 páginas)
Imprimir página
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
1
Turn On Your Equipment
1
C onnect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
O pen the A/V Mute slide (lens cover). Make sure the slide is
opened completely.
3
R emove the battery cover on the remote control. Locate the two AA
batteries that came with the projector and insert them. Then replace
the battery cover.
4
T o turn the projector on, press the Power button on the projector or
the remote control. The projector beeps once, and the projector's power
light flashes green and then stays on.
Power light
Power button
To shut down the projector, press the Power button twice and simply
unplug it. You don't have to wait for the projector to cool off.
2
Adjust the Image
1
T o raise the image,
press the foot release
button for the front
adjustable foot and lift
the front. Release the
button to lock the foot
in position.
*411777900*
*411777900*
PowerLite
1716
®
Quick Setup
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
I f your image looks like
or
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
I f your image looks like
or
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
•
T o connect to a notebook, see "If
connecting to a notebook" below.
•
T o project over a wireless network,
see "If projecting wirelessly using
the optional wireless LAN module"
on the back of this sheet.
•
T o give a presentation stored on a flash drive, digital camera, or
other USB storage device, see the EasyMP Operation Guide on your
projector CD.
If connecting to a notebook...
1
T urn on the projector and adjust the image as described in sections
1 and 2 of this sheet.
2
D o one of the following:
•
C onnect the square end of the USB cable to the projector's
Type B (square) USB port.
C onnect the flat end of the USB cable to any available USB port
on your notebook (Windows
one-time driver file.
•
C onnect one end of the VGA computer cable to the projector's blue
Computer (Component Video) port.
C onnect the other end to your notebook's video-out port
or
monitor port. Switch your notebook to external display.
Zoom
, you've placed the projector off
, press the
or
buttons on
USB cable
VGA computer cable
(Windows only)
only). Click Agree to install a
®