ECKey EK6 series Manual de instalación y funcionamiento - Página 6

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Controladores de acceso IP ECKey EK6 series. ECKey EK6 series 15 páginas. Internal/external mounting – red and green led control from access control system
También para ECKey EK6 series: Manual del instalador (9 páginas)

Imprimir página
6.
PC Management Software Settings (cont'd)
TOOLBAR ITEMS
a.
User Guide – Displays a guide for the current profile being used (n/a for v5.0.0.4646).
b.
Install Guide – Displays general installation guide for specific model of connected ECKey reader.
c.
Summary – Provides paragraph description of current ECKey reader settings.
d.
Get Settings – Gets the current settings from the reader.
e.
Apply Settings – Applies current PC Management Software settings to the reader.
7.

Configuring an EK6 Reader

Setup Tab
a.
Reader Name – Name of connected reader.
b.
Application – Defines the type of application the reader is being configured for. The EK6 offers only 'Card Reader'.
c.
Relay Type – Defines the Wiegand output format that will be sent to the access control system on trigger.
d.
Buzzer – Defines the on-board buzzer duration when triggered by phone. Options are:
i.
Silent (no buzzer)
ii.
On with relay (buzzer on for duration of triggered action)
iii.
On for period of 1 second (momentary buzz when triggered)
e.
Site Code – Site code for the 26 bit Wiegand card number. Range is 0-255.
f.
Card Range – Sets the min/max 26 bit Wiegand virtual card number. Range is 0-65535.
g.
Minimum Delay – Minimum time before repeated virtual card numbers are sent to the access control system
for the same phone. When multiple phones are in range, the unique virtual card numbers are sent every
500ms, but will not be repeated during the delay period.
ECKey Installation and Operation Guide
6