Epson PowerLite Pro G5450WU Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Software Epson PowerLite Pro G5450WU. Epson PowerLite Pro G5450WU 20 páginas. Esc/vp21 command for business projectors
También para Epson PowerLite Pro G5450WU: Manual de instrucciones (47 páginas), Declaración de conformidad (4 páginas), Tarjeta de referencia rápida (7 páginas), Manual del usuario (25 páginas)

Troubleshooting

Error Messages

The application cannot be used with your OS version.

Update your OS to the required version.

To use EasyMP Slide Converter, PowerPoint® 2002 or a

later version must be installed.

Close PowerPoint®, then convert the file.

The file cannot be saved to the specified location. Specify

another location and try again.

The file could not be copied to the specified location.

Specify another location and try again.

There is not enough available space in the specified

location. Specify another location and try again.

The file cannot be copied because there is not enough

available space in the specified drive.

This file cannot be written to the specified location

because there is not enough available space.

EasyMP Slide Converter cannot be installed under the OS being used. Install under a supported OS.

s "Software Requirements"

p.5

Reinstall EasyMP Slide Converter after installing PowerPoint 2002 or later.

s "Installing the Software"

p.5

When PowerPoint is running, the conversion process may not complete normally. Close PowerPoint,

then convert the file.

There are times when you may not be able to save a file such as if you do not have write access to the

specified folder. Specify another location and try again.

There is insufficient space on the specified drive to save the file. Make space in the drive so that the file

can be saved by deleting any unnecessary files.

There is insufficient free space on the specified drive to transfer the scenario. Make space in the drive

so that the scenario can be sent by deleting any unnecessary files.

There is insufficient free space on the specified drive to set AutoRun. Make space so that the file can

be written by deleting any unnecessary files.

Remedy