Toshiba e-studio 2802af Manual de instalación del software - Página 19
Navegue en línea o descargue pdf Manual de instalación del software para Impresora todo en uno Toshiba e-studio 2802af. Toshiba e-studio 2802af 48 páginas.
Imprimir página
2.INSTALLATION IN WINDOWS
Installing the drivers using Plug and Play
You can use the Windows Plug and Play function to install the drivers in Windows Vista / Windows Server
2008. When using Plug and Play, first the scanner driver is installed, and then the printer driver.
For Windows 7, Windows 8, Windows Server 2008 R2, or Windows Server 2012, use the installer to install
the drivers. The Windows Plug and Play function cannot install them.
P.14 "Installing the drivers using the installer"
An additional printer wizard can also be used to install the printer driver. To use the additional printer
wizard, select the USB port or the network port that the equipment is connected to using "Choose a Printer
Port".
1
Connect this equipment to the computer using a USB cable, and then start the
computer.
Do not connect or disconnect the USB cable when starting up the computer.
2
Turn on the equipment.
The Found New Hardware dialog box appears.
If it does not appear, turn off this equipment, and then wait approximately 10 seconds before turning it
on again. If you turn this equipment on immediately after turning it off, it may not function correctly.
3
Click "Locate and install driver software (recommended)".
The dialog box requesting the disk (Client Utilities/User Documentation DVD*) appears.
*
The Client Utilities DVD is available for e-STUDIO2802A/2802AM/2802AF.
If the User Account Control dialog box appears, click [Allow] or [Continue].
2 INSTALLATION IN WINDOWS
Installing the Drivers in Windows
17