Toshiba e-studio 3008a Manual de información de seguridad - Página 21
Navegue en línea o descargue pdf Manual de información de seguridad para Impresora todo en uno Toshiba e-studio 3008a. Toshiba e-studio 3008a 25 páginas. Multifunctional digital color systems
Imprimir página
Other points
Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause
malfunctions.
Do not turn the power OFF with misfed paper remaining inside the equipment.
This could cause a malfunction when the power is turned ON next time.
Be sure to turn the power OFF when leaving the office or if there is a power outage. However, do not
turn the power OFF if the weekly timer is in use.
Be careful because the paper exit area and paper just after exiting are hot.
Do not place anything other than paper on the receiving tray. This could disturb a normal operation
and cause malfunctions.
Do not touch the photoconductive drum, transfer belt and 2nd transfer roller. This could cause
image problems.
Do not open/close the covers and the bypass tray, or pull out the drawers during printing.
During maintenance or inspection
Never attempt to repair, disassemble or modify the Multifunctional Digital Systems by yourself. You
could cause a fire or get an electric shock.
Always contact your Service representative for maintenance or repair of the internal parts of the
Multifunctional Digital Systems.
Do not let liquids such as water and oil get into the system when cleaning the floor. This could cause
a fire and give you an electric shock.
Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could
cause a fire and give you an electric shock due to the heat released by electric leakage.
Do not touch the stapling area. The actual needle point could cause you personal injury.
Other points
Do not use such solvents as thinner or alcohol when cleaning the surface of the Multifunctional
Digital Systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
Repair parts will be provided for a period of 7 years after the final manufacturing of the product.
The life of each consumable differs depending not only on the copy/print volume but also on other
factors (operating time, output image, media type and so on). Due to this, the life cannot be
specified in a simple description using the copy/print volume. For more details, contact your
supplier where you purchased the product.
When handling supplies
Never attempt to incinerate toner cartridges and waste toner boxes. Dispose of used toner
cartridges and waste toner boxes in accordance with local regulations.
Other points
Read the operator's manual carefully to replace the toner cartridge using the correct procedure. An
improper procedure could cause toner leakage or scattering.
Safety Information 21