Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Manual de consulta rápida - Página 8

Navegue en línea o descargue pdf Manual de consulta rápida para Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 12 páginas. Warranty statement
También para Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Hoja de especificaciones (6 páginas), Primeros pasos (13 páginas), Folleto y especificaciones (6 páginas), Manual de instalación (16 páginas), Manual de la red (46 páginas), Manual de instalación (4 páginas), Manual de información del producto (16 páginas), Garantía limitada (12 páginas)

Replacing Printer Parts (continued)

Hold down the side pin, as shown, then turn the

latch to the right.

Release the side pin and carefully remove the cutter

blade.

Insert the new cutter blade.

Hold down its side pin and secure it with

the latch.

Close the top cover. The carriage returns to the home

position and the cutter replacement is complete.

Replacing the Maintenance Tank

You need to replace the Maintenance Tank

(part # C12C890191) when you see MNT TNK FULL

on the LCD display. The ink light also turns red.

Note:

If you are using 220 ml ink cartridges, remove the

four cartrides from the right ink compartment, then close

the compartment cover.

Pull out the maintenance tank as shown.

Caution:

Do not tip the tank, or ink may spill out.

Place the used tank in the plastic bag included with

the new tank.

Insert the new tank.

Note:

If you removed any 220 ml ink cartridges,

replace them after inserting the new

maintenance tank.