Epson Stylus Pro 7600 Photographic Dye Ink Actualización manual - Página 4

Navegue en línea o descargue pdf Actualización manual para Software Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 4 páginas. Epson stylus pro 7600: brochure
También para Epson Stylus Pro 7600 Photographic Dye Ink: Folleto y especificaciones (24 páginas), Manual de instalación y desembalaje (24 páginas), Manual de información (16 páginas), Especificaciones (4 páginas), Manual de instalación rápida (34 páginas), Información sobre el producto (15 páginas), Manual de consulta rápida (11 páginas), Garantía (8 páginas), Folleto y especificaciones (8 páginas), Folleto y especificaciones (16 páginas), Manual de referencia del producto (28 páginas)

6. Slide the interface card along the slots on both sides of the interface compartment. Push it in firmly to fully

insert the connector at the rear of the interface card into the printer's internal socket.

7. Secure the interface card in the slot with the two screws included with the interface card.

8. Connect a compatible interface cable to the interface card and to your computer. If the cable has a ground

wire, secure it with one of the screws.

When connecting your printer and computer with the IEEE1394 interface board, attach the ferrite core

that is packed with your printer to the cable as shown.

Also, if you are using more than one computer, reconnect the other interface cable.

9. Make sure the printer is turned off. Then plug in the power cord.

To remove an interface card, follow the above steps in reverse order.

Reference Guide

The product code for the Photo Black ink cartridge is wrong. The correct product code is T5431.

The product code for the Auto Take-Up Reel Unit is wrong. The correct product code is C12C815251.

The units for Paper Feed Adjustment are 0.01%.

Roll Feed Spindle 2 inch (High tension / for Stylus Pro 7600) and Roll Feed Spindle 3 inch (High tension

/ for Stylus Pro 7600) cannot be used with the Stylus Pro 7600. The only high-tension spindle that can be

used with Stylus Pro 7600 is the 2/3 inch Dual Roll Feed Spindle, C12C811155.

Printed in Japan xx.xx-xx