Philips SignageSolutions 32BDL3510Q Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Monitor Philips SignageSolutions 32BDL3510Q. Philips SignageSolutions 32BDL3510Q 39 páginas.

Imprimir página

32BDL3510Q

V position

Moves the vertical position of the image up or

down.

Auto adjust

Press "Set" to detect and adjust H position, V position,

Clock, Phase automatically.

NOTE: VGA input only.

Screen reset

Reset all settings in the Screen menu to factory preset values.

5.2.3. Audio

PICTURE

Balance

SCREEN

Treble

AUDIO

Bass

TILING

Volume

NETWORK

Audio Out Volume

CONFIG

Volume Maximum

OPTION

Volume Minimum

Mute

Speaker

Audio Out Sync

Source

Audio reset

Balance

Adjust to emphasize left or right audio output balance.

Treble

Adjust to increase or decrease higher-pitched sounds.

Bass

Adjust to increase or decrease lower-pitched sounds.

Volume

Adjust the volume.

Audio Out Volume

Adjust to increase or decrease the line out audio output

level.

Minimum volume ≤ Volume ≤ Maximum volume

NOTE: This function will be disabled when Audio Out Sync

is ON.

Volume Maximum

Adjust your own limitation for the maximum volume setting.

This stops the volume from being playing at too loud a

level.

Volume Minimum

Adjust your own limitation for the minimum volume setting.

Mute

Turn the mute function on/off.

Speaker

Turn the internal speaker on/off.

NOTE: This function only availavle when "Audio Out Sync"

is on.

Audio Out Sync

Line out volume sync with Volume.

On : Enable the function.

Off : Disable the function and gray out Audio Out Volume.

Source

Select the audio input source.

Analog: audio from audio input.

Digital : audio from HDMI/DVI audio.

Audio reset

Reset all settings in the Audio menu to factory preset

values.

5.2.4. Tiling

PICTURE

SCREEN

AUDIO

TILING

NETWORK

100

CONFIG

OPTION

Off

Digital

With this function you can create a single large-screen

matrix (video wall) that consists of up to 150 sets of this

display (up to 10-sets on the vertical and 15-sets on the

horizontal sides). This function requires a daisy-chain

connection.

Switch on delay

Set the power-on delaying time (in seconds). The default

option {Auto} allows a sequential powering-on for each

display by their ID number when multiple displays are

connected.

The options are:{Off(0) / Auto(1) /2-255}

Brightness: {Normal}/{ACS}

{Normal}: Adjust the overall image and background screen

brightness (backlight).

{ACS}: Apply brightness value (backlight) which is adjusted

by MIC tool. The default value before adjustment is the

same as OSD brightness value, e.g., 70)

Enable

Enable or disable the Tiling function. If {On} is selected, the

display will apply the settings in {H monitors}, {V monitors},

{Position}, and

{Frame comp.}.

H monitors

Set how many displays in horizontal side.

V monitors

Set how many displays in vertical side.

Position

Set the position of this display in the screen matrix.

Switch on Delay

Auto

Brightness

Normal

Enable

Off

H monitors

V monitors

Position

Frame comp.

Off

Frame comp. Top

Frame comp. Bottom

Frame comp. Left

Frame comp. Right