Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Manual del usuario - Página 19
Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31 páginas. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
También para Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C: Especificaciones (2 páginas), Manual (31 páginas)
Imprimir página
– If the system is reading the disc,
programming is not possible,
" READING " will be displayed and
followed by " DISC X " . " X " is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible only
when playback is stopped.
1 Press í or ë repeatedly to review
the programmed tracks.
2 Press Ç once to exit review mode.
Playing the program
1 Press PLAYÉ Å to start program
playback.
™ "PLAY PROGRAM" will be
displayed.
™ The track number and elapsed
playing time of the current track will
appear on the display.
• If you press REPEAT during program
playback, the current track or all
programmed tracks will be played
repeatedly.
™ "TRACK" or "PROGRAM" will be
displayed.
™ The
and
appear on
REPEAT
PROGRAM
the display.
2 Press Ç to stop program playback.
pg 01-31/P88/22-Eng
19
Notes:
– If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
program will be ignored temporarily. The
display also will disappear
PROGRAM
temporarily from the display. It will
reappear when playback of the selected
disc ends.
– REPEAT DISC mode is not available
when program playback begins.
Erasing the program
(when
playback is stopped)
• Press Ç.
™ "PROGRAM CLEARED" will be
displayed.
Note:
– The program will be erased when the
system is disconnected from the power
supply or when the CD carousel tray is
opened.
Shuffle
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ "SHUFFLE" will be displayed.
™ The
, the disc and the track
SHUFFLE
selected at random appear on the
display.
• The discs and the tracks will be played
in random order until you press Ç.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™ "TRACK" or "ALL DISC" will be
displayed.
™ The
and
appear on the
REPEAT
SHUFFLE
display.
2 Press SHUFFLE again to resume normal
playback.
™ The
disappears from the
SHUFFLE
display.
Note:
– REPEAT DISC mode is not available
when shuffle is selected.
3/6/00, 1:26 PM
CD
Repeat
(only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control to
select the various repeat modes.
™ "TRACK", "DISC", "ALL DISC" or
"OFF" will be displayed.
™ The
appears on the display.
REPEAT
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press Ç.
2 Press REPEAT until the "OFF" mode is
displayed to resume normal playback.
™ The
disappears from the
REPEAT
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffle mode.
– You can also repeat shuffling a program.
™ "TRACK" or "PROGRAM " will be
displayed.
™ The
,
and
REPEAT
PROGRAM
SHUFFLE
appear on the display.
3139 116 19721
19