Toshiba HD-EP35KE Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Reproductor de DVD Toshiba HD-EP35KE. Toshiba HD-EP35KE 40 páginas. Toshiba hd-ep35kb; hd-ep35ke hd dvd players
También para Toshiba HD-EP35KE: Manual del usuario (40 páginas)
Imprimir página
Preparation (Continued)
Step 2: Connecting to audio system
Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your
player to an AV receiver with an HDMI audio input.
This connection requires selection of "Digital Out HDMI" (Step 16,
To HDMI OUTPUT
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a
receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of "Digital Out SPDIF" (Step 16,
Via 5.1ch analog audio output
This connection requires selection of "Speaker Setting" (Step 16,
Audio cable
(not supplied)
16
Downloaded From Disc-Player.com Toshiba Manuals
HDMI cable
(supplied)
HDMI INPUT
AV amplifier
Optical digital cable (not supplied)
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
CENTER
L
R
SURROUND
AV amplifier
L
R
FRONT
SUBWOOFER
To ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
page 22).
Caution
• When you are connecting (via the HDMI
HDMI cable
(not supplied)
HDMI OUTPUT
HDMI INPUT
Note
• You may need to adjust the HDMI audio output
HDMI compatible
device
page 22).
optical cable to connect this jack to an
optical audio input on a device capable of
processing Dolby Digital, DTS bitstream, or
PCM audio.
DIGITAL INPUT
OPTICAL
AV amplifier
page 23).
OUTPUT jack) an AV decoder that does not
have Dolby Digital or DTS decoding capability,
be sure to set "Digital Out HDMI" (
page 22)
to "PCM" or "Downmixed PCM". Otherwise,
high volume sound may damage your hearing
as well as the speakers.
to match the capabilities of your AV amplifi er.
In this case, set "Digital Out HDMI" (
22) to "PCM".
*To use the optical digital output, use an
page