Philips BTD2180 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips BTD2180. Philips BTD2180 32 páginas. Bluetooth 70w
También para Philips BTD2180: Manual rápido (3 páginas), Breve manual del usuario (2 páginas)
Imprimir página
3 Connect
Place the unit
1
Place the unit near the TV.
2
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•
To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•
Place this unit on top of a table.
•
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
EN
8
1
Hold down the socket flap.
2
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to "R",
left speaker wires to "L".
• Insert the red wires to "+", black wires
to "-".
3
Release the socket flap.
Connect video cables
You can select the best video connection that
your TV supports.
Option 1: Connect through a composite
•
video (CVBS) cable (for a standard TV).
Option 2: Connect through component
•
video cables (for a standard TV or
Progressive Scan TV).
Option 1: Connect through a
composite video cable
•
Connect the composite video cable
(supplied) to:
• the VIDEO socket on the back of the
unit.
• the video input socket on the TV.