Philips BTM3160/12 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips BTM3160/12. Philips BTM3160/12 20 páginas.
Imprimir página
Program radio stations
manually
1
Tune to a radio station.
2
Press PROG, and then press
select a number from 1–20.
3
Press PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press
number.
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS station.
2
Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available).
• Radio text message
• Program type
• Frequency
• Stereo or Mono
12
EN
/
to
/
to select a preset
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for more than two seconds.
» The hour digits are displayed and begin
to blink.
2
Press
/
repeatedly to set hour.
3
Press SLEEP/TIMER to confirm.
» The minute digits are displayed and
begin to blink.
4
Repeat steps 2-3 to set minute, select
a source (CD, FM, or USB), and adjust
volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to activate or
deactivate the alarm.
» If timer is activated,
Tip
•
If CD/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.
is displayed.