Toshiba TDP-F10U Manual del usuario - Página 21

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-F10U. Toshiba TDP-F10U 50 páginas. Led projector

Preparing and using the remote control

For the first time use

1 Remove the transparent insulation

sheet by pulling it before use.

Replacing battery

1 Remove the battery holder.

2 Remove the old lithium coin cell and

install new one (CR2025). Ensure that

the battery surface with the mark "+"

is facing up.

3 Push the battery holder back into the

remote control until you feel a click.

Operating the remote control

Turning the power on by sliding the

power switch to ON position.

Point toward the projector's infrared

remote sensor, and press a button on

the remote control.

•

Operating the projector from the front

Note:

When operating the remote control from

behind the projector, the infrared signal is

reflected on the projecting surface. The

operating range therefore may decrease

depending on the shape and material of

the projecting surface.

Approx. 15°