Toshiba TDP-MT500 Manual del usuario - Página 20

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-MT500. Toshiba TDP-MT500 40 páginas. Home projector
También para Toshiba TDP-MT500: Manual del usuario (42 páginas)

Imprimir página
Toshiba TDP-MT500 Manual del usuario
VIEWING VIDEO IMAGES

Main power switch

POWER button /

POWER indicator
POWER button
If the projected image frame is deformed to a trapezoid:
Adjust the trapezoidal correction value contained in the setting menu.
(See to Page 26 for the method of setting the menu.)
1. Bring up the INSTALLATION menu.
2. Select "KEYSTONE" by pressing the {, } buttons.
3. Press the ENTER button.
4. While viewing the image frame, align the upper and lower sides of the
image frame by pressing the $, % buttons.
When canceling the menu:
5. Press the MENU button.
•
When changing the "KEYSTONE" setting, the image may distort or disappear in a moment. However, this is
not a malfunction.
20
When stopping projection:
8 Press the POWER ( ) button.
•
•
9 Press the POWER ( ) button again.
•
10 Wait about 2 minutes until the POWER indicator
•
•
•
•
POWER ON/STANDBY
SOURCE
DVI
C1
C2
D
COMP1
COMP2
DVI-D
11 Turn "OFF" the main power switch (I O).
DVI
S
V
A
S-VIDEO
VIDEO
DVI-A
•
16:9
4:3
ZM
16:9
4:3
ZOOM
REAL
DYN
REAL
DYNAMIC
ASPECT
•
2
3
1
ENTER
MENU
EXIT
CNT
BRI
COL
TIN
CONTRAST BRIGHT
COLOR
TINT
TEM
GAM
SH
COLOR
GAMMA SHARPNESS
TEMP
LIGHT
LIGHT
A confirmation message appears on the screen.
To cancel this state, wait for a while, or press the EXIT
button or MENU button on the remote control, or press
the MENU/EXIT button of the projector.
The light-source lamp goes off and the projector goes
to standby. The POWER indicator blinks in orange.
comes on in orange.
Wait about 2 minutes in the standby, because during
this time the intake/exhaust fan is cooling the light-
source lamp.
The intake/exhaust fan continues to turn for about one
minute after the POWER indicator has come on in
orange.
Do not turn off the main power switch while the
POWER indicator is blinking. If the main power switch
is turned off immediately after use, the projector may
malfunction.
The fan makes a loud sound while cooling down, but
this is not a malfunction.
When the projector is not used for a long time, unplug
the power plug from the power outlet for safety.
Attach the lens cap to prevent dust from being gath-
ered from outside.
KEYSTONE
KEYSTONE
0