Toshiba TDP-SP1 Manual del usuario - Página 24

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-SP1. Toshiba TDP-SP1 46 páginas. Tdp-sp1u user's guide

Turning the power on and off

Insert the power cord connector into

the AC IN socket of the projector.

Insert the power cord plug into a

wall or other power outlet.

■ Removing the lens cover

■ Turning the power on

Press the ON/STANDBY

button.

The power is turned on, and the ON/

STANDBY indicator lights green. After

a moment, the start-up screen ap-

pears.

CAUTION

• Do not look into the lens while the lamp is on. The strong light from the lamp may cause

damage to your eyesight.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheat-

ing.

• Do not place your hands, face, or other objects near the air exhaust, the lamp cover or

the bottom of the unit. Doing so could result in injury and/or damage the object.

Notes

• The start-up screen will disappear after a moment. You can also configure the system to

prevent the start-up screen from appearing. To do this, use the Default setting menu

p.34

• The first time you use the projector after purchase, after the start-up screen disappears,

the start menu is displayed

• Do not touch the lens directly with your hand. If fingerprints or stains are left on the

projection lens surface, they may interfere with the projector's ability to project images on

the screen.

Be sure to remove the lens cover when the power is

turned on. If the cover is left on the projector, it could

become deformed due to heat.

Control panel

p.26

Power cord connector

(Supplied)

Remote

Control

Start-up screen