Toshiba TDP-TW355 Manual del usuario - Página 39

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-TW355. Toshiba TDP-TW355 48 páginas. Data projector
También para Toshiba TDP-TW355: Manual del usuario (47 páginas), Especificaciones (2 páginas)

Imprimir página

Using the Wireless Utility (Continued)

Click on the Remote

Control button.

The Remote Control window

appears.

As the Wireless Utility window is

still displayed, you can operate the

projector via the Remote Control

window, while using the Wireless

Utility's functions.

While it is possible to use this function merely to operate the projector, closing the

Wireless Utility also closes the Remote Control window.

Select the projector to be operated.

In the Remote Control window, click on the

desired projector from the pull-down list. When you make a selection,

the Remote Control window displays as shown in the right figure.

Only one projector can be selected. (It is not possible to operate

multiple projectors.)

Click on the Remote Control window's buttons.

The function of each button and box is as follows:

Power On:

Turns projector power on.

Power Off: Turns projector power off.

Freeze:

The picture is paused.

Input (box) : Click on the

button, and select the desired input from the pull-down

list.

Go:

Switches to the input selected in the Input box.

Mute:

Cuts off picture and sound. Click again to restore picture and sound.

Volume +/–: Adjust sound volume.

Resize Off: Restores the picture to its original size.

Resize +/–: Adjusts the enlargement ratio.

Move screen (up/down/left/right/diagonal)

To quit, click on the

button on the Remote Control

window.

Performing this does not close the Wireless Utility window.

To exit both the Wireless Utility and the Remote Control, click on the

the Wireless Utility window.

button, and select the

button on

How to use the JPEG Conversion Tool

The JPEG Conversion Tool converts JPEG files not supported by the projector, image files

in other formats, Microsoft

PowerPoint

files, and the like into JPEG files supported by the

projector. The JPEG files converted with this tool can be displayed by sending them using the

wireless LAN PC card

p.69

, or saving them on a memory PC card or a USB memory.

Launching the JPEG Conversion Tool

The window shown in the figure to the right appears on the

computer screen.

Drag the Image Quality Settings slider to the left or right to set the

image quality of the file after conversion. Lower values create

smaller files, but lower the image quality. (It is not possible to restore

the quality of an image after it has been lowered.)

Converting an image file

This converts JPEG files using compression formats not supported by the projector,

Windows

metafiles (wmf), and bitmapped files (bmp) into JPEG

files.

(1) In the Conversion Method field, select Converting image

file. (Status on launch)

(2) In the File settings field, click on the Browse button for

Original Image File Name.

The Open dialog box appears.

(3) In the Open dialog box:

(a) Specify the location of the file to be converted; and

(b) In the Files of Type field, click on the

the file format. A list of files of that format appear in the

Open dialog box.

(4) In the Open dialog box, select the file to convert, then

click on the Open button.

(5) In the JPEG Conversion Tool window, in the File

settings field, select Browse for File name after

conversion. The Save As dialog box appears.

(6) In the Save As dialog box:

(a) Specify the location in which to save the converted

file;

(b) Enter a file name of up to 8 characters in the File

Name field; and

(7) (a) In the JPEG Conversion Tool, click on the

Conversion button.

(b) A confirmation dialog box opens. Click Yes.

The computer converts the file. When it finishes a

message appears informing you that a "JPEG file has

been created".

(1)

(2)

(5)

button to select

(7)-(a)

(3)-(a)

(3)-(b)

(6)-(a)

(6)-(b)

(7)-(b)

(4)

(6)-(c)