Toshiba TDP-TW95 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-TW95. Toshiba TDP-TW95 46 páginas. Usb reader, wireless lan, power zoom, auto focus
También para Toshiba TDP-TW95: Especificaciones (2 páginas)

Imprimir página

Using handy features (Continued)

■ Changing screen size

The screen size for the projected image can be changed.

Press the remote control's SCREEN SIZE button.

Pressing the button switches Full/Thru/Wide in turn.

Notes

• Thru display is available for computer-input images.

• [Screen size] of the Display setting menu has the same function

p.38

• If you use this function on commercial video software, broadcast

or cable-broadcasting except for the purpose of your private

viewing and listening, it may infringe the copyright protected by

the copyright laws.

■ Freezing the image (Freeze)

The image being projected can be frozen. This function is to be used

to pause a video during a presentation, etc.

Press the remote control's FREEZE button.

The picture pauses. (The Freeze function is released when

pressing the FREEZE button again.)

Notes

• The

icon will appear while freeze is in effect.

• Other operation will also release the freeze.

• Even if an image is frozen on the projector, the pictures are

running on the video or other equipment.

• If you use this function on commercial video software, broadcast

or cable-broadcasting except for the purpose of your private

viewing and listening, it may infringe the copyright protected by

the copyright laws.

Remote

Control

Remote

Control

■ Password function

When the password function is added and [Password] is set to [On], image projection

requires an entry of the preset password at power-on.

To add the password function, perform the following procedure:

(The password function, once added, cannot be deleted. Set [Password] to [Off] if you

do not want to use it after addition.)

Notes: • This password is different from that for the wireless LAN.

• When adding the password function, switch the input to other than Wireless or

USB.

How to add password

Set the projector to the operating status or the standby mode.

Select and hold the

button until the LAMP, TEMP, and FAN

indicators light in orange.

The password function is added when the steps up to here have been completed. It

is also added to the Default setting menu.

How to set password (from [Off] to [On])

Select [Password] in the Default setting menu and press the

button.

The password setting confirmation screen is displayed. ([OK] or [Cancel])

Select [On] and press the

The password entry screen is displayed.

Enter a four-digit number for the password using numeric keys of the

remote control.

The input number appears as [****].

Re-enter the same password for confirmation.

When the password is confirmed, the setting is complete and the password

becomes [On].

If the password is wrong, repeat the procedure from step

How to operate when password is [On]

Turn on the power.

The lamp lights and the password entry screen appears.

Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector

goes into normal operation. If the password is wrong, a message appears to

prompt you to re-enter the password, and again the password entry screen is

displayed. If you enter a wrong password for more than 5 times, the projector will

automatically power off and enter standby mode.

button.