Toshiba TDP-TW95 Manual del usuario - Página 27

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-TW95. Toshiba TDP-TW95 46 páginas. Usb reader, wireless lan, power zoom, auto focus
También para Toshiba TDP-TW95: Especificaciones (2 páginas)

Imprimir página

Setting up the wireless LAN (Continued)

<DHCP>

If you set DHCP to Use, the IP address of the projector is assigned automatically by the

DHCP server. If your network environment does not assign IP addresses automatically,

set DHCP to Not use, then set the following items IP address, Subnet mask and

Gateway manually.

When DHCP is set to Not use, consult with your network administrator for the settings

below and set the IP address manually.

An IP address is a unique number assigned to a terminal. The format is a string of four

dot-separated three-digit numbers. (Example: 111.112.xxx.xxx)

A subnet mask is used to determine what subnet the IP address assigned to a terminal

belongs to. (Example: 255.255.xxx.xxx)

This value specifies the device, such as a router, to be used to access servers outside

the network. It is identified by the IP address. (Example: 111.112.xxx.xxx)

• [Setting initialization]

This item resets the wireless LAN settings to their factory defaults.

• [Projector name]

This can be used to identify projectors when communicating with multiple projectors, or

if there is a possibility that another person who is out of communication range will be

using the same projector. It is recommended this is set to prevent wrong transmission.

• [WEB browser]

Browser authentication and Password are factory-set to Off and no string, respec-

tively. You should set them as soon as possible.

If you have forgotten your password, set it again using the menu on the main unit.

■ Computer settings

Refer to instruction manuals of your computer or wireless LAN adapter to perform the

following settings.

• Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).

• [Channel] : You may need to set channels depending on the wireless LAN adapter being

used. Make the [Channel] settings identical to the computer settings.

• Set SSID (for some types of wireless LAN adapter, use Network name instead) as the

same as projector's SSID (at factory shipment, this is set to TDPJ).

• If Encryption, Network authentication, Key index and WEP key are set on the projector,

set to the same values.

Note

• The Easy Connect utility

p.68

allows users to easily connect the projector to a computer

over wireless networks, without making network setting. For Easy Connect support, the

computer requires a wireless LAN environment that is NDIS5.1 compliant.

Refer to the user's manual supplied with the wireless LAN adapter or the wireless LAN

embedded computer for more information.