Philips FW P88 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips FW P88. Philips FW P88 30 páginas. Mini hi-fi system with 3 cd changer
También para Philips FW P88: Manual del usuario (31 páginas), Manual del usuario (31 páginas), Especificaciones (2 páginas), Especificaciones (2 páginas), Manual (32 páginas), Manual (31 páginas)

Imprimir página

MINI HIFI SYSTEM

STANDBY

POWER SAVE

IR SENSOR

CD 1•2•3

FM•AM

C 1 • 2 • 3

BAND

TUNER

SEARCH•TUNING

CLOCK/

PROG

TIMER

BASS

PLUS

Important:

Before you operate the system,

complete the preparation

procedures.

Demonstration mode

The system has a demonstration mode

that shows the various features offered

by the system. When the system is

switched on for the first time, the

demonstration mode will start

automatically.

Notes:

– During the demonstration, if you press

any source (or standby-on) button, the

system will switch to the respective

mode (or standby).

– When the system is switched to standby

or power save mode, the demonstration

will resume five seconds later.

pg 01-28/C85/37-Eng

OPERATING THE SYSTEM

TAPE 1•2

CDR/DVD

TAPE

AUX

CDR

PRESET

SIDE

STOP•CLEAR

PLAY PAUSE

DUB

DIM

A. REV

RECORD

(HSD)

TREBLE

wOOx

TECHNOLOGY

LEVEL

To stop the demonstration mode

• Press and hold Ç(on the system

only) for five seconds when the

system is in demonstration mode.

™ The demonstration will stop.

™ "DEMO OFF" will be displayed.

™ The system will switch to standby

mode.

Notes:

– When the system is switched on from

the main power outlet, the CD carousel

tray may open and close again to

initialize the set.

– Even though the AC power cord is

removed from and reconnected to the

wall socket, the demonstration will

remain off until it is switched on again.

To start the demonstration mode

• Press and hold Ç(on the system

only) for five seconds when the

system is in standby mode.

™ The demonstration will begin.

Easy Set

EASY SET allows you to store all

available radio stations automatically.

• Press and hold STANDBY ON (on

the system only) for five seconds

when the system is in standby or

demonstration mode.

™ "EASY SET" will be displayed, and

followed by "TUNER" and then

"AUTO".

™ EASY SET will start searching for

all radio stations on FM band and

then followed by radio stations on

AM band.

™ All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Notes:

– EASY SET will start with the FM band,

if there are still presets available, the

system will continue to store the AM

band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET

is completed.

2/16/00, 9:02 AM

Switching the system ON

• Press CD, TUNER, TAPE or AUX.

You can also switch on the system by

pressing any one of the CD DIRECT

PLAY buttons.

Switching the system to

standby mode

• Press STANDBY ON or B on

the remote control.

™ The system will switch to standby

mode.

Switching the system to

power save mode

(when

Demonstration mode is stopped)

• Press POWER SAVE to switch to

energy saving mode ( < 2 watts ).

™ "LOW POWER STANDBY ON" will

be displayed, after which the

display screen goes blank.

™ The low power STANDBY ON

LED will be lit.

Note:

– if the demonstration mode has not

been disabled, it will resume five

seconds later.

3139 116 19591 (ENG)